0～0.55Mpa (adjustable)

AUTOOL CT180 is an intelligent injector cleaning & testing equipment with intelligent control. The whole process can be operated by the touch screen or rotary knob to complete. Equipped with an ultrasonic cleaning tank, AUTOOL CT180 Fuel injector cleaner and Tester can generate an oscillating signal to the injectors to remove the stubborn carbon deposits from the injectors. It is possible to test injectors under different conditions, such as Sprayability test, Leakage test, Injecting flow test, etc. A comprehensive and powerful injector cleaner and tester machine most auto technicians always crave for.Support for more cars and motorcycles.Can only be used to clean diesel fuel injectors.The cleaning fluid is 3M car injector cleaning fluid, and the test fluid is industrial alcohol.Its working voltage range is 110-230V. AUTOOL CT180 is a fuel injector cleaner and tester machine with a 4.4 inch high-resolution touch screen. It realizes automatic cleaning, testing and live monitoring of dynamic values of 4-cylinder engine injectors through intelligent design. Different testing conditions can be set to test the injectors, such as sprayability test, leakage test, injection flow test, etc. The whole working process of CT180 can be completed by touch screen or knob operation, which can be a brand new experience for the auto repair industry.It is an expert in injector solutions, featuring 7 injector-specific functions 01. Ultrasonic cleaning: It can clean several injectors at the same time and completely remove carbon deposits from the injectors. 02: Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush. 03: Leakage test: To test the sealing and dribbling conditions of injectors under system pressure. 04: Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection. 05: Automatic test: To test injectors by simulating different working conditions. 06: No-disassembly cleaning: Direct cleaning without disassembling the injectors, this function is an additional function, which requires special adapters. 07. Settings: The Settings interface is used to set the default values whenever the device is started.Support For 99% Cars & Motorcycles Support for Audi，for Australia Ford，for Benz，for BMW，for Brilliance，for Chevrolet，for Chevy，for Chrysler，for Citroen，for Dacia，for Dadi，for Daewo，for Daihatsu，for Demo，for Fiat，for Ford，for GM，for Holden，for Honda，for Hyundai，for Isuzu，for Jaguar，for Kia，for Lancia，for Land Rover，for Mahindra，for Maruti，for Mazda，for Mitsubish，for Nissan，for Opel，for Peugeot，for Porsche，for Renault，for Romeo，for Rover，for Saab，for Seat，for Skoda，for Smart，for Subaru，for Suzuki，for Tata，for Toyota，for Volvo，for VW，for Yamaha.What injectors does this device support?1. Our product supports 99% of gasoline injectors for cleaning and testing, but for diesel injectors, it can only support cleaning but not testing. 2.If you need to test and clean 75V high pressure injector GDI, please buy CT60 pulse signal transmitter and special adapter and fixing screw, please contact me!What liquid do I need to choose?How to choose cleaning fluid? We recommend using a professional syringe ultrasonic cleaning fluid, which can be purchased at your local store.How to choose test fluid? We recommend using a professional automotive injector testing fluid. If not available locally, as an alternative, we recommend using an industrial alcohol with an alcohol content of more than 75% instead of the test fluidNote: 1. Cleaning fluid is placed in the ultrasonic box for engine carbon cleaning. 2. Test fluid or industrial alcohol is placed in the glass tube for injector testing. Please do not confuse these 2 liquids and do not add other liquids. If you are not sure if the liquid is correct, please contact me in advance with pictures Intelligent Control Panel DesignUltrasonic Cleaning TechMultiple Test FunctionsTo deliver premium user experiences and make it more efficient to use,AUTOOL CT180 Fuel injector cleaner and Tester is designed with Touch Screen and Rotary Knob. With large 4.4-inch screen display, it is easy to observe various working parameters.The AUTOOL CT180 intelligent injector cleaner and tester is equipped with a separate ultrasonic cleaning tank. The vibration signal generated by ultrasonic waves is applied to powerfully clean the surface and interior of the fuel injectors, so as to completely removing stubborn carbon buildup from the fuel injectors.It can carry out Sprayability test, Leakage test, Injecting Flow test, Automatic test and many other testing functions. A variety of test parameters can be set to simulate injector testing under various operating conditions.Backlight Design & Level GaugeThe glass tube can be observed through the level gauge during the test, so that the injector flow can be determined whether the flow is normal. At the same time, the backlight can assist in making the observation more carefully.Three Years Warranty, Lifetime Maintenance: For damage caused by non-human factors, AUTOOL promises to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours. It is an expert in injector solutions, featuring 7 injector-specific functions 01. Ultrasonic cleaning: It can clean several injectors at the same time and completely remove carbon deposits from the injectors. 02: Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush. 03: Leakage test: To test the sealing and dribbling conditions of injectors under system pressure. 04: Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection. 05: Automatic test: To test injectors by simulating different working conditions. 06: No-disassembly cleaning: Direct cleaning without disassembling the injectors, this function is an additional function, which requires special adapters. 07. Settings: The Settings interface is used to set the default values whenever the device is started.Specifications: Main unit power supply: AC110V±10%, 50/60Hz. Main unit power: 150W Dimension of main unit: 27cm x 31 cm x 34cm Ultrasonic cleaner power: 60W; Fuel pressure:0-10bar Simulated RPM range: 20～10000rpm; Pulse width: 0.5～25ms; step 0.1 ms; Uniformity/Sprayability test duration: 1~20min Leakage test duration: 1~30min Injecting flow test duration: 3~120s Automatic drain: 60s Pressure unit: Bar, Psi, Kpa, mmHg, Kg/cm2 Dimension: 305x310x340mm Weight: 8.8kg (Varies according to configuration) Working conditions: Temperature: -10~+40℃; Relative humidity: ＜85%; Intensity of outer magnetic field: ＜400A/m; No flame within 2 meters. Functions ● Ultrasonic cleaning ● Uniformity/Spray-ability test ● Leakage test ● Injecting flow test ● Automatic test ● On-vehicle cleaning ● Reverse flushPacking list: 1pc* AUTOOL CT180 Intelligent Fuel injector cleaner and Tester Main unit 1pc* Ultrasonic cleaning tank 1pc* Testing pad 1pc* Ultrasonic leaning stand 4pcs* Connector 1 (H19*25*10.5) 4pcs* Connector 2 (H19*25*13.5) 4pcs*Fine-tooth joint(H19*25*M12) 4pcs*Coarse joint(H19*25*G1/4-19) 3pcs*Plug (25*40*16.2)4pcs*Reverse joint(25*40*16.2) 2pcs*Adjusting stud (M10*78) 2pcs*Compression screw(18*100*M10) 2pcs*Knurled nut(18*30*M10) 1pc* 4-oil separator(28*16*213) 1pc*Funnel (58*50*8.0) 1pc* Wrench for Oil draining(24*56*5) 20pcs* Sealing ring 7*2.65 4pcs*Seal ring 15.6*2.65 2pcs* power cables (EU US standard) 2pcs* Pulse signal lines MORE PRODUCTSMORE PRODUCTSMORE PRODUCTS 3 YEARS WARRANTY Delivery DetailsMORE PRODUCTS MORE PRODUCTS MORE PRODUCTS 3 YEARS WARRANTY Delivery Details