The injector cleaner automatically heats up the cleaning fluid, quickly heating up to 2000 ml of cleaning fluid to 50°C. This effectively removes stubborn carbon deposits, improves cleaning efficiency and ensures optimal performance of the injectors.
FOXWELL JT200 Automotive Fuel Injector Cleaner Tester Injector Cleaning Machine. Foxwell JT200 Function & Feature. Foxwell JT200 Main functions. Cars, Motorcycles & More (Not for GDI). Protect every vehicle in your garage.
The CT160 Ultrasonic Fuel Injector Cleaner Tester is the ultimate solution for maintaining and optimizing fuel injector performance. Designed with advanced ultrasonic cleaning and testing technology, it ensures thorough removal of carbon deposits and blockages, restoring injector efficiency and engine power.
Foxwell JT200 Injector Tester – for 6V/12V MPI motorcycles & cars. Simulates engine conditions to test uniformity, atomization, tightness, and flow volume. Features clear tubes for spray pattern inspection and graduated cylinders for precise measurement. Adjustable RPM (100–9900) in auto/manual modes. Compatible with most EFI/MPI top-feed injectors (not GDI), includes adapters. For 6V bikes and 12V vehicles. Use kerosene/diesel only – never gasoline. Kit includes: main unit, power/signal cords, fuel rail, adapters, measuring cylinders, washers. Specs: DC12V, 1.2‑1.5bar, 150ml tank, 100ml cylinder. Fast shipping & warranty. Order now!.
It features ultrasonic cleaning with a 1600ml tank to effectively remove carbon deposits and other contaminants. Ultrasonic Cleaning : Fully automatic operation with strong cleaning power, using a 1600ml tank to effectively remove carbon deposits, gum, and other contaminants from fuel injectors.
It not only can be used to clean and test the standard injectors, of note that it can carry out GDI injectors, including compatible for Benz, BMW, AUDI, Porsche. This allows for a more comprehensive and professional detection.
Fuel Injector Ultrasonic Cleaner 6Cylinder Tester For GDI TSI FSI Injector CT400. AUTOOL CT400 GDI Fuel Injector 6-cylinder Cleaner and Tester is a great upgrade, which adapts the latest GDI design. It not only can be used to clean and test the standard injectors, of note that it can carry out GDI injectors, including compatible for Benz, BMW, AUDI, Porsche.
Foxwell JT200 Injector Tester – for 6V/12V MPI motorcycles & cars. Simulates engine conditions to test uniformity, atomization, tightness, and flow volume. Features clear tubes for spray pattern inspection and graduated cylinders for precise measurement. Adjustable RPM (100–9900) in auto/manual modes. Compatible with most EFI/MPI top-feed injectors (not GDI), includes adapters. For 6V bikes and 12V vehicles. Use kerosene/diesel only – never gasoline. Kit includes: main unit, power/signal cords, fuel rail, adapters, measuring cylinders, washers. Specs: DC12V, 1.2‑1.5bar, 150ml tank, 100ml cylinder. Fast shipping & warranty. Order now!.
AUTOOL CT400 GDI EFI TSI Fuel Injector Cleaner Tester Ultrasonic Cleaning Machin AUTOOL CT400 GDI Fuel Injector 6-cylinder Cleaner and Tester is a great upgrade, which adapts the latest GDI design. It not only can be used to clean and test the standard injectors, of note that it can carry out GDI injectors, including compatible for Benz, BMW, AUDI, Porsche. It comes with multi voltages available for GDI injectors, which enables to adapt for different types of injector testing. The machine is the necessary and preferred equipment for the automotive serving and maintenance, research, and teaching training departments.Our product supports 99% of injector cleaning and testing. However, for diesel injectors, it only supports cleaning but not testing. It is an expert in Injector solutions, featuring 12 injector-specific functions 01. Ultrasonic cleaning: It sends signals to the injectors through the pulse signal line, using the cleaning fluid with the ultrasonic vibration so as to completely remove the carbon and impurities inside the injectors. 02. Idle speed test (0-20ms): Simulate the engine idling speed and test the state of the fuel injector. 03. Medium speed test (0-7.5ms): simulate the engine running at medium speed and test the state of the fuel injector. 04. High-speed test (0-4ms): Simulate the high-speed performance of the engine and test the state of the fuel injector. 05. Acceleration test: Simulate the acceleration state of the car and test the performance of the fuel injector. 06. Shift speed test: Simulate the shifting state of the car and test the working performance of the fuel injector. 07. Leakage test: Test the sealing condition of the fuel injector. 08. Idle dpeed sprayability Test: Simulate the engine idling state and test the spraying performance of the fuel injector. 09. Medium speed sprayability test: Simulate the engine medium-speed state and test the spraying performance of the fuel injector. 10. High-speed sprayability test: Simulate the high-speed state of the engine and test the spraying performance of the fuel injector. 11. Reverse flush: Reverse flush is a way to clean the injectors with the test liquid flowing from the outlet to the inlet of the injector. Reverse flush may remove the dirt inside the injector or the injector Strainer (Only for the top fuel supply injector). 12. No-disassembly cleaning: Direct cleaning without disassembling the injectors, this function is an additional function, which requires special adapters. How to choose cleaning fluid? Cleaning fluid is used to clean deposits (such as carbon deposits) on fuel injectors, and it is usually highly corrosive and flammable. In order to achieve the best test effect, it is recommended to use professional injector ultrasonic cleaning fluid. How to choose test fluid? The test fluid is used to test and judge whether the performance of the fuel injector is in good condition. It is a colorless and transparent liquid with no irritating odor, non-corrosive, and not easy to emit. Its function is to simulate various working states of the fuel injector as a medium. In order to achieve the best test effect, it is recommended to use professional automotive injector test fluids. If it is not available locally, as an alternative, it's recommended that medical alcohol with an alcohol content of more than 75% can be used instead of the test fluid. Note: 1. Cleaning fluid is placed in the ultrasonic box for engine carbon cleaning. 2. Test fluid or industrial alcohol is placed in the glass tube for injector testing. 3.Please do not confuse these 2 liquids and do not add other liquids. If you are not sure if the liquid is correct, please contact me in advance with pictures For GDI Injector Cleaning&Test:Multi Voltage Selection:Upgrade Ultrasonic Cleaning:AUTOOL CT400 can clean and test not only standard injectors but also GDI injectors, such as for Mercedes-Benz, BMW, Audi, Porsche, Ford, and other direct injection engines.AUTOOL CT400 GDI Fuel Injector 6-cylinder Cleaner and Tester designs with various types of voltage output (12V, 70V & 120V) to be selected to adapt for different types of injector testing.Different from other cleaner& tester machines, AUTOO CT400 comes with a cooling fan and thermal protection, and with a power of 60w, its ultrasonic cleaning capacity is significantly enhanced. Various Parts equipped&Portable Drawer :6-Cylinder & 2 Draining Ports Design:Smart Control PanelIt is equipped with a variety of injector accessories for different needs. A portable drawer at the bottom is designed to store a variety of parts and for easy access. AUTOOL CT400 can test and clean 6 injectors at the same time for better efficiency; it also has both control valves for cleaning solution draining and test liquid recovery. Very easy and convenient to deal with and no worries about leaving a mess.Function selection, working digital display, GDI pressure selection, timing setting, multi-function button control panel.Working environment and technical parametersTechnical parameter ● Fuel tank capacity: 1500 ml ● Test tube amount: 140 ml ● RPM range: 0～7500 r/min ● Time range: 0～9900 times ● PWM pulse width: 0～20.0 ms ● System pressure: 0～0.55Mpa (adjustable) ● Timing: 0～20 minutes adjustable ● Ultrasonic cleaning power: 60W (intermittent work) ● Ultrasonic cleaning frequency: 28 KHZ±0.5 KHZ ● Dimensions: 390mm (length) × 410mm (width) × 430 mm (height) ● Weight: 16.6KGWorking environment Power supply: AC 110 ±10% Frequency: 50-60HZ±0.5 Relative humidity: <85% Ambient temperature: 0℃～＋40℃ External magnetic field strength: <400A/m No open flames are allowed around Packing List: 1* AUTOOL CT400 GDI Fuel Injector Cleaner&Tester 6* Taper adapter φ10.5-13.6φ 6* Fit For BMW special adapters 1* Special nozzle pad 5* Plugs for oil rail 1* Ultrasonic bath cover 6* 16mm adapters 6* Nozzle pads 1* Oil rail1* Ultrasonic cleaning bracket 1* Filling funnel 1* Outlet valve 6* 11mm adapters 6* 12mm adapters 6* 12.5mm adapters 6* 13mm adapters 6* 14mm adapters 6* 15mm adapters 1* User manual with warranty card VISIT OUR STOREMORE PRODUCTSMORE PRODUCTS 3 WARRANTY&SERVICEDelivery DetailsVISIT OUR STORE MORE PRODUCTS MORE PRODUCTS 3 WARRANTY&SERVICE Delivery Details1.We will ship according to your EBAY address but sorry that we can not accept P.O.BOX address. Please make sure it’s correct . This will help your product to be received safely and quickly! 2.International Buyers Please Note: 1) Please check with your country customs office to determine what these additional Import tariffs costs will be prior to bidding / buying. 2) It's the buyer's responsibility to complete clearance when parcel reached your Customs. We are Not responsible for buyers's local taxes, please consult local Customs for Tax Details. Customs rates vary from country to country, please understand. 3. Any further queries, please don't hesitate to email us. Thank you
AUTOOL CT160 Auto Car Ultrasonic Fuel Injector Tester Cleaner Cleaning Machine AUTOOL CT160 is a fuel injector cleaning machine newly developed by AUTOOL TECH. It combines ultrasonic cleaning technology and microcomputer oil pressure closed-loop control cleaning and detection technology. This product simulates various engine working conditions and cleans and inspects various automobiles and motorcycle fuel injectors. Its unique design saves weight and volume, while further optimizing the product's functionality. With a larger cleaning tank and cleaning fluid heating effect, which can achieve better cleaning results. Ultrasonic Cleaning It can perform ultrasonic cleaning on single or multiple injectors simultaneously,which can eliminate thoroughly blockages on the injector accessories and internal.Heating the Cleaning Fluid AUTOOL CT160 cleaner machine is able to heat the cleaning fluid in the cleaning tank,which can improve the cleaning effect on injectors.Distinctive Shape Design Compact,lightweight,portable,net only weighs 8kg; large capacity ultrasonic cleaning tank of 2000ml, all cleaned at once. Recovery Cleaning Fluid The used cleaning fluid and testing fluid can be easily recovered.Humanized Design Equipped with LED display, pressure gauge, glass tubes, testing liquid level gauge and multifunctional control panel, the injector pulse tester allows easy operation through its clear menu, and real-time monitoring of fuel injector detection and fuel dynamic value.Wide Range of Application Supports most of the cars and motorcycles in the market.This cleaning machine can be also used to clean diesel injectors,but can not test the diesel injectors. Main Function:Ultrasonic cleaning Idle speed test, Medium speed test, High speed test, Accelerating test, Variable speed test, Leakage test, Idle spray voulme test,Medium spray volume test, High spray volume test.Unit info How to work: 1)Cleaning Mode: Pour in the injector detergent and place the injectors in the ultrasonic cleaner tank. Connect the pulse signal wire and select the ultrasonic cleaning function to start working. 2)Testing Mode: Pour in the test liquid, install the fuel injector to the fuel distributor and fix it to the main unit by bolts. Test if the injector is leaking or blocked under different functions. Specification: Tank capacity:1300 ml Range of rotation:0-7500r/min PWM pulse width:0～20.0ms step 0.1ms Time:0～20min Cleaning frequency:40 kHz Cylinder volume:180 ml Injection times:0～9900 times, step 100ms System pressure:0～0.6Mpa Ultrasonic cleaning power:70WMachine size: 292 x 260 x 273mm Package dimension: 340*295*360mm Working environment:Power supply: AC110V±10% Frequency: 50HZ±0.5 Relative humidity: <85% Environment temperature: 0℃～＋40℃ External magnetic field strength: <400A/m No open flames are allowed around. Package Include: 1pc* AUTOOL CT160 Fuel injector Cleaner Machine 1pc* Refilling funnel 1pc* Ultrasonic leaning stand 1pc* Testing pad 2pc* Oil drain valve 1pc* Lock pole 1pc* Lock nut 4pc* Extended plug 4pc* Motorcycle top oil inlet connectorⅠφ10mm 4pc* Motorcycle top oil inlet connectorⅡφ11mm 4pc* Motorcycle top oil inlet connectorⅢφ10.6mm 4pc* Car top oil inlet connectorⅢφ10.6mm&13.4mm 3pc* Plug 1pc* Signal wire 4pc* Adapter cable 1pc* Oil rail 1pc* User manual PaymentDelivery detailsReturn PolicyAbout usContact usPayment1. We accept PayPal only.2. Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) payment can be accepted ONLY through PayPal.3. Other payment methods (Bank transfer, Cheque, etc.) are NOT acceptable.4. Please make the payment within 3 days.Delivery details1. We ship to WORLDWIDE .2. Item will be shipped out within 1-2 working days (except weekends and holidays) after the payment is cleared or received.3. We will send item to your Confirmed Shipping Address in Paypal only.Please confirm your order and address before you bid or pay the item.4.International Buyers Please Note: 1)Please check with your country customs office to determine what these additional costs will be prior to bidding / buying. 2)Import duties, taxes and charges are the buyer’s responsibility,please understand. Return PolicyItem may be returned for refund or replacement within 30 days of the purchase date. Defective products may be returned for repair up to 1 year from the purchase date. Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.Before any return, a Return Merchandise Authorization (RMA) must be obtained by contacting the seller. Any products returned to us without an RMA will be sent back to the buyer at his/her expense. The buyer is responsible for the cost of returning any merchandise.About usWe are a professional worldwide Professional company. We are reliable supplier to both wholesalers and retail sellers. We supply many products on Automobile consumer.Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!Contact usOur normal business hour is Monday to Friday 9:00 AM to 6:00 PM Beijing TIME. Please email me through "MY MESSAGES" on eBay, if you have any questions about our listings or inventory or troubles. All messages be reply within 24 hours. Welcome your any-time parchase!