ANCEL S300 Car Evap Smoke Machine Oil Pipe Leaks Analyzer Tester Fuel Pipe Leakage Generator Auto EVAP System Diagnostic Tools. ANCEL S300 Product Specifications. ANCEL S300 smoke leak detector supports multi-system testing, especially EVAP system.
The difference of S200 and S300Do You Bothered By The Following Problems? More fuel consuming? Faster idling speed? Water Leaks? Hard to find the leaks?Ancel S300 supports multi-system testing, especially EVAP system EVAP System Test Intake System Test Exhaust Systems Test Crankcase system test Car Sealing Test Fuel Tank System Test Turbo System Test Various Pipe Fittings Test Wide Range of Applications Free to choose Air/Smoke method to find leaksUpgraded S300 Automotive Smoke Machine Fits All Lines and Hoseshow to work with ancel S300 smoke leak detector? Step1: Fill in 10ml-20ml test oil (baby oil) to the detector Step2: Disconnect the pipe that needs to be connect with the detector Step3: Connect detector with DC12V battery,device starts to work Step4: The pipe will be filled with smoke,check the leak points2 kinds of modes: AIR model+Smoke mode Air mode :First, use the air mode to directly measure the leak, and judge whether there is a leak by the pressure gauge value. If it is less than 0.5bar, it will inevitably leak. If it reaches 0.8bar and above, the pipeline tightness is very good.Then there is no need to waste baby oil SMOKE MODE:After the air mode determines that there is a leak, use the smoke mode to find the leak.How to judge leakage- through the pressure gauge? NO Leak: When the value of the pressure gauge remains unchanged and the flow meter will read zero (ball at bottom of scale), it means that there is no leakage in the system. Small Leak: When the value of the pressure gauge drops and the ball in the flow meter slowly fall to the bottom of the scale, it indicates a small leak in the system. Massive Leak: When the value of the pressure gauge reaches zero and the flow meter ball never falls to the bottom of the scale, it indicates a large leak in the system. Adjustable Smoke Output Help To Pinpoint Leaks Quick Adopt The Latest 5th Generation TechnologyOverheat & Anti-frost Protection Overheat Protection When the temperature of the device exceeds 75℃, power protection will be intelligently activated to turn it off. Anti-frost Protection The device can also work normally at -20℃. Easy To Detect an Air Leak Vehicle CabinSpecification Power source:12V Fully Charged vehicle battery Current:6A Flow rate: <6 L/min Pressure output:0.8-1.0 bar (0.8-14.5psi) Diagnose All Types Of Leaks With Adapters Built-in with air pump ADDITIONAL CAP PLUGS KIT
Features & Specifications: ✅ Wide Testing Range EVAP systems, Intake Systems, Cooling / EGR / Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks. ✅cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats. ✅ Dual Mode Test: Smoke & Air ✅ Newest Frequency Conversion technology ✅ Fast Smoke output in 2-3s, 0.8-1.2bar output pressure ✅ Built-in Flow Meter/Air Pump/Pressure valve ✅ Precision Testing for Sensitive System ✅ Curved corners & hook design ✅ Overheat and antifreeze protection ✅ Built-in control circuit board —————————— Packing List: 1 x Main Unit 1 x Funnel 1 x Smoke Tube 1 x Power Cord 1 x Hook 1 x User Manual 1 x Inflatable Adaptor 1 x Intake Adaptor Cord 1 x Air Drum Rubber 1 x 23pcs Caps.
1X Foxwell SD203 Main Unit. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.
By observing the pressure indicator, the leakage is clear at a glance. ANCEL S1000 Car Smoke Leak Detector Introduction ANCEL S2000 Car Smoke Leak Detector Features 【Wide Compatibility】 ANCEL S1000 is designed for detecting the leakage of pipe systems on cars, motorcycles, trucks such as fuel pipe, air intake system and cooling tank.Simple operation and quick locator the leak part.
If it exceeds the working limit (Over 167°F) it will power off automatically. The evap smoke machine has its own air pump. It does not rely on other air machine and connect the detector with DC12V battery.
Model S100 S200 S300 S300 Lite S3000 L3000. EVAP System Test. The price is reasonable and we have top rated after-sales service. Model S100 S200 S300 S300 Lite S3000. 1pc ANCEL S100 Main Unit. 2pc EVAP Kit.
EVAP System Test. The price is reasonable and we have top rated after-sales service. 1pc ANCEL S100 Main Unit. 1pc EVAP Removal Tool. 2pc EVAP Kit. 1pc EVAP Adapter. Cars, light trucks and speedboats, etc.
ANCEL S110 PRO 12V Car Smoke Leak EVAP Leakage Gas Leakage Locator Oil Pipe Generator Smoke/Air Mode Car Diagnostic Tool PK S100. Ancel S110 pro Support multi system-------The necessity of smoke leakage detection.