6L/min

ANCEL S300 Automotive EVAP Smoke Machine Diagnostic Tool Vacuum Leak Detection

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

ANCEL S300 Car Smoke Machine Leak Detector 12V Car EVAP Fog Machine Vacuum Diagnosis Fuel Pipe Leak Tester for All Cars /Trucks （Excluding Baby Oil） Ancel S300 supports multi-system testing, especially EVAP system EVAP System Test Intake System Test Exhaust Systems Test Crankcase system test Car Sealing Test Fuel Tank System Test Turbo System Test Various Pipe Fittings Test Do You Bothered By The Following Problems? More fuel consuming? Faster idling speed? Water Leaks? Hard to find the leaks? Upgraded S300 Automotive Smoke Machine Fits All Lines and Hoses How to use Ancel s300? 1. Fill 20ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover. 2. Disconnect the pipe that needs to be connected with detector. 3. Connect detector with DC12V battery, turn on the power switch, and the detector starts to work 4. In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary. 2 kinds of modes: AIR model+Smoke mode Air mode :First, use the air mode to directly measure the leak, and judge whether there is a leak by the pressure gauge value. If it is less than 0.5bar, it will inevitably leak. If it reaches 0.8bar and above, the pipeline tightness is very good.Then there is no need to waste baby oil SMOKE MODE:After the air mode determines that there is a leak, use the smoke mode to find the leak. How to judge leakage- through the pressure gauge? NO Leak: When the value of the pressure gauge remains unchanged and the flow meter will read zero (ball at bottom of scale), it means that there is no leakage in the system. Small Leak: When the value of the pressure gauge drops and the ball in the flow meter slowly fall to the bottom of the scale, it indicates a small leak in the system. Massive Leak: When the value of the pressure gauge reaches zero and the flow meter ball never falls to the bottom of the scale, it indicates a large leak in the system. Adjustable Smoke Output Help To Pinpoint Leaks Quick Adopt The Latest 5th Generation Technology Overheat & Anti-frost Protection Overheat Protection When the temperature of the device exceeds 75℃, power protection will be intelligently activated to turn it off. Anti-frost Protection The device can also work normally at -20℃. Easy To Detect an Air Leak Vehicle Cabin Diagnose All Types Of Leaks With Adapters Power Cord Delivery Hose Funnel Intake Bladder Service Replacement Adapter Cone EVAP Adapter EVAP Removal Tool Cap Plugs Kit ANCEL S100/S200 FULL SYSTEM DIAGNOSTICS, DON'T MISS ANY LEAKS EVAP SYSTEM TEST: Leakage in the fuel evaporation system causes fuel vapour to escape into the atmosphere, resulting in waste and pollution or unstable engine idling. EXHAUST SYSTEM TEST: Uncleaned harmful gases escaping into the atmosphere or increasing the noise of the vehicle are the main disadvantage when leaks occur in the exhaust. FUEL TANK SYSTEM TEST: If there are gaps in the fuel tank and pipes caused by improper installation or insufficient sealing of the fuel tank cap, it may cause leaks in the fuel tank system. TEST OF VARIOUS PIPE CONNECTIONS: Smoke test of brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses, etc. CAR SEALING TEST: Poor sealing of the car can lead to many inconveniences, such as it is not warm and dusty, not soundproof, not waterproof, etc. CRANKCASE SYSTEM TEST: Excessive pressure or corrosion of the crankcase is the main reason why the crankcase seal is damaged and oil leaks. INTAKE SYSTEM TEST: A leak in the intake system will result in inadequate intake of the car engine, leading to low engine performance. TURBO TEST: The leakage of coolant would cause the engine to indicate a high water temperature. How to do leakage test? Step 1: Fill in 10ml-20ml test oil (baby oil) to the detector Step 2: Connect the delivery house to the detector Step 3: Disconnect the pipe that needs to be connect with the detector Step 4: Connect detector with DC12V battery,device starts to work Step 5: The pipe will be filled with smoke,check the leak points ANCEL S100 ADVANCED TECHNOLOGY Intake System Test,Exhaust Systems Test,Crankcase system test,Car Sealing Test,Fuel Tank System Test,Turbo System Test,Various Pipe Fittings Test. ANCEL S100/S200/S300 Car Smoke Leak Detector Support All of Car Models For detecting the leakage of pipe systems on cars,motorcycles,snowmobiles,off-road vehlicles,ATVS,light trucks and speedboats,Suitable for all car models OVERHEAT & ANTI-FROST PROTECTION Overheat Protection:When the temperature of the device exceeds 75℃,power protection will be intelligently activated to turn it off. Anti-frost Protection:The device can also work normally at -20℃ Smoke Leak Detector ANCEL S100 Output pressure:0.5PSI Output Volume:<8LPM Power Supply:DC12V Current:5AMP Product Packing List 1pc * ANCEL S100 Car Smoke Leak Detector Main Unit 1pc * Power Cord 1pc * Hook up 2pc * EVAP Kit 1pc * Smoke Delivery Hose 1pc *Air AdptANCEL S200 Package List ANCEL S300 Package List PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept all common forms of payment such as Credit cards、Debit card、Google Pay ect. Please contact us if you need to use another method to pay. Payment should be made within 4 days after bidding ends. Otherwise a Unpaid Item case will be opened to you. We are not responsible for buyers’ local taxes. Please include your special requests in eBay note if there is any.Delivery detailsShipping methods: USPS First Class Mail Service /USPS Priority Mail Service/UPS Surepost SERVICE/ UPS GROUND SERVICE I will process your order within one business day (excluding holiday and weekend)If you have any problems, you can contact me first or local USPS, UPSTerms of salesPlease do not hesitate to leave us your PositiveFeedbackandgood review If you are satisfied with our productsIf youare unsatisfiedwith your purchase,please email us first to get a better solution before you leaveaneutralornegative feedback, we work hard to make sure every customer 100% satisfied and resolve any problem for you. Thank you for your kindness. About usWe are a professional Authorized dealers of AUTEL, LAUNCH,ANCEL,FOXWELL, OBDSTAR， AUTOPHIX, KZYEE, NEXAS,Autek ，WOYO，etc. We support remote assistance by TeamViewer if you have any difficulty in software installation. Contact usAny questions, you can feel free to contact me by ebay message or whatsapp.Due to time difference, I may not be able to reply immediately, but I will reply within 24 hoursPlease contact me first before giving negative feedback or opening case. Wish we can solve the problem peacefully. Working hours:0:00 am - 3:00 am Pacific Time， 6:00-9:00 pm Pacific Time, 11:00 pm - 12:00 pm Pacific Time.

Continue lendoANCEL S300 Automotive EVAP Smoke Machine Diagnostic Tool Vacuum Leak Detection

AUTOOL SDT203 Automotive EVAP Smoke Machine Diagnostic Car Vacuum Leak Detection

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

AUTOOL SDT203 Automotive Smoke Leak Detector is a full-featured, high-performance automotive repair tool. The leak detector is equipped with a visual flow meter and an adjustable meter knob that allows the user to easily observe and control the flow rate of the smoke output. Whether you have no leaks, small leaks or large leaks, the pressure display allows you to quickly diagnose the problem and help you locate it.The SDT203 Automotive Smoke Leak Tester has a built-in air pump, eliminating the need to purchase an additional connection to an air compressor, which saves the user time and moneyAUTOOL always selects long-lasting and durable product materials, adheres to the production process of excellence, and upholds the spirit of revolution and innovation, committing to creating products with innovative and superior quality for users.Why Choose AUTOOL?Premium Tough Quality3 Year WarrantyFast & Secure Delivery30 Day Free Returns24/7 Attentive Service Why Choose AUTOOL SDT203 Automotive Smoke Leak Diagnostic Machine? What does it do? Finding leaks is easier if you own an AUTOOL SDT203 smoke detector. It can be used to find all plumbing leaks, air intake leaks, electro-pneumatic components, throttle leaks, turbo leaks, crankcase leaks, gas tank leaks, EVAP leaks, cooling system leaks and more in your car, and it's easy to carry, compact and easy to use. Don't waste all day looking for bad hoses, use baby fluid to start your machine to find leaks. Don't ask the repair store to use their smoke detectors, it will cost you hundreds of dollars. If you own your own AUTOOL SDT203 smoke detector you will save yourself more money and time. If you own a repair store, it will bring you more business and ease of work. Test Functions AUTOOL SDT203 Automotive Smoke Leak Detector is a versatile and professional automotive pipeline leak detection tool that will help you quickly and accurately locate car/motorcycle leaks on your piping system. It can produce a large amount of smoke within 30 seconds to help mechanics detect leaks in piping systems. Support Intake system test. Ex-haust system test. Crankcase system test. Vehicle sealing test. Fuel Tank System Testing. Turbocharging system test. Various pipe fitting tests.AUTOOL SDT203 Product Features √ This device has a built-in air pump, no need for you to connect an additional air compressor to ensure stable air pressure delivery. √The output size can be adjusted by flow meter, manual control is safer for EVAP.√ Built-in pressure gauge for monitoring total system pressure, smoke mode introduces smoke into the vehicle system for leak detection.√ Adjustable flow meterAir flow meter with adjustable buttons for easy control of smoke effect ,Output flow rate: <6L/min √5 feet durable air hose. √5 feet of battery cable clamps to connect positive and negative batteries to produce smoke. √ Tapered tip and universal air bladder fits a variety of hoses. √Use the included handle so you can hang or carry the unit √ Easy to use, easy-to-read instructions make it easy to get started , meeting the needs of your business. √ All units are electrically tested to meet our stringent quality requirements. √ Suitable for all automobile makes and models. √ Made of sturdy metal, more durable and better looking than paint can units.Wide Range of ApplicationsFor detecting leaks in ductwork on cars, motorcycles, snowmobiles, dirt bikes, ATVs, light trucks and speedboats. Suitable for all vehicle typesPowerful and Easy to operateThe AUTOOL SDT 203 has its own Air Pump without relying on other machines and Pressure Gauge with precise scales. Simply connect the detector with the DC12V battery, it can output thick smoke within 30s after turning on.Advanced TechnologyIt works on the EVAP system. (Provided with another version that specially designed for EVAP system). Equipped with dual flow meters for accurate data display & Independently controlled Air mode and Smoke mode. Overheat & Anti-frost ProtectionWhen the temperature of the device exceeds 75°C, power protection is intelligently activated to turn the device off. -Freeze protection allows the device to operate at -20°C.Portable appearanceThe SDT203 weighs just 2.5kg, making it easy for you to use this device quickly and saving you time. 3 Years WarrantyWe promise that the equipment has a 3-year warranty and 1-year parts warranty, if you have any needs, we warmly welcome you to contact us, we will provide you with solutions as soon as possibleHow to do leak test？ 1. Fill 10ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover. 2. Disconnect the pipe that needs to be connected with detector. 3. Connect detector with DC12V battery, turn on the power switch, and the detector starts to work. 4. In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.Q&A Q: How do I buy tobacco liquid? A: This device does not contain any liquid, you can use liquid paraffin and baby oil. Q: How much liquid should I add? A: You only need to add 10ml to this device, please do not add more than this or the liquid will overflow to the outside of the machine. Q: Why doesn't the indicator light turn on after inserting the batteries? A: Please check if your battery voltage is 12V, this appliance can only work under 12V voltage tage. Q: Why does the smoke evacuation stop suddenly, what should I do? A: This machine has overheating protection function, the machine will stop working automatically, please switch off the machine to let it cool down before restarting. Q: Are there obvious oil drops on the pipe? A: This is caused by adding more than 20ml of oil, please pour out all the oil in the device, let the machine run for 5 minutes, wait for smoke from the air outlet, at this time you can add 10ml of oil to make the machine work normally again. Q: Why does the machine not smoke when the indicator light is on? A: Dear customer, hello, firstly check whether there is more than 20ml of oil in the device you added, then check whether the power supply voltage meets the requirement of 12V. Caution 1. When using this SDT203 Automotive Smoke Leak Detector for the first time, please fill it with 20ml of oil. Please take care not to exceed this range. 2. Test fluid: liquid paraffin and baby oil are fine. 3. Fresh oil should only be refilled when the smoke becomes thin, and not more than 10ml at a time. 4. Before refilling the fresh oil, please pour out the remaining oil in the detector and change the detector oil regularly. 5. During the leakage detection, please keep away from smoke-sensitive parts. 6. Do not run the detector continuously for more than 8 minutes. It needs intermittent rest. 7.The detector has an intelligent protector that automatically shuts off the power if the operating limit is exceeded, e.g., over 75°C. The detector is not designed to operate at this temperature. In this case, please operate it later. 8. If the test tube needs to be disconnected in the center, secure the other side with a rubber stopper.Package Include: 1pc* AUTOOL SDT 203 Car Smoke Leak Detector main unit 1pc* Power Cord Clamp 1pc*Smoke Hose 1pc* Standard Cone Adapter 1pc* Universal Airbag 1pc* Hard Rubber Hose Plug 1pc* Hook 1pc* funnel 1pc* User ManualMORE PRODUCTSMORE PRODUCTSMORE PRODUCTS 3 YEARS WARRANTY Delivery DetailsMORE PRODUCTS MORE PRODUCTS MORE PRODUCTS 3 YEARS WARRANTY Delivery Details

Continue lendoAUTOOL SDT203 Automotive EVAP Smoke Machine Diagnostic Car Vacuum Leak Detection

EVAP Smoke Machine Leak Detector Automotive Fuel Pipe System Vacuum Smoke Tester

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

EVAP Smoke Machine Leak Detector Automotive Fuel Pipe System Vacuum Smoke Tester SDT106SDT202SDT203SDT205SDT205SSDT206SDT208 AUTOOL SDT 206 Car Smoke Leak Detector is a professional auto pipe leak detect tool. It will help us position cars motorcycles leakage on the pipe systems quickly and exactly, such as fuel pipe, air Intake system, exhaust system, and cooling tank.[Wide Range of Applications]For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats. Suitable for all car models. [Powerful and Easy to Operate] The AUTOOL SDT 206 has its own Air Pump without relying on other machines and Pressure Gauge with precise scales. it can output thick smoke within 30s after turning on. [Overheat & Anti-frost protection] The detector has smart protector. If it exceeds working limit,for e.g over 80℃. It will power off automatically[SPECIFICATIONS]Built-in two compressors. Smoke Output Value: 0-6L/min. Output Pressure: 12-18PSI. Heating Material: Mineral Oil or Baby Oil(oil not included). Adjustable Flow Switch and Fluidometer Guage help control easily. [Dual test modes] Air mode: Turning on the air mode allows you to determine if there is a leak in the pipe by introducing air into the pipeline, there is no need to purchase additional air compressors or air pumps, making your diagnostics easy and cost-effective. Smoke Mode: After determining that there is a leak in a pipe, turning on Smoke Mode can help you quickly locate the leak. [Advanced Technology]It works on the EVAP system. (Provided with another version that specially designed for EVAP system). Equipped with dual flow meters for accurate data display & Independently controlled Air mode and Smoke mode. SpecificationsMain unit dimensions:275*150*150MMPackage weight:5.0KGPackage dimensions:300*235*320MMOutput pressure:12-18psiOutput flow:6L/minAir pressure output:Built-in air pumpPower supply:DC12V BatterySoft Rubber Hose Plug Diameter: 9mm, 12mm, 16mm, 17mm, 20mm, 25mm, 31.5mm, 50mmHard Rubber Hose Plug Diameter: 5/10mm, 9/15mm, 14/19mm, 18/26mm, 25/35mm, 32/45mm, 45/60mm, 60/75mmPacking List1pc *SDT 206 Main Unit1pc * Hook (with hand-tighten nuts)1sets * Rubber hose plug (with serial specification)1pc * standard cone adapter1pc * power cord clamp1pc * oil bottle(oil not included)1pc*EVAP special connector1pc*smoke hose1pc* Universal Airbag Adapter1pc * User manual Small Size Design Most smoking machines are bulky and heavy, which is not conducive to the transportation and storage of the equipment. AUTOOL SDT103 weights only 1.7kg. It is small and light, not only for easy storage, but also for ease of use.Overheat & anti-frost protection Built-in intelligent protection device, if it exceeds the working limit,such as 75℃ it will automatically turn off the power to ensure the safety of the operator and the equipment.Special detection for EVAP The sdt103 can be used by connecting an external air source and a 12V battery.It is designed with a built-in pressure controller to fix the output pressure at 3.2Kpa (0.46psi), which is especially for EVAP system testing to prevent EVAP Pipes from being damaged by excessive pressure.Smoke flow can be Adjusted Equipped with airflow meter to observe the current airflow volume. And the airflow regulator to better control the smoke effect.It can be outputs lots of Smoke within 30 seconds after turning on.Wide range of applications For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.Works on all car makes and models.3 years warrantyFor damage caused by non-human factors, we promise to resend parts for free within 3 yearsSpecification: Heating Material: mineral Oil or Baby Oil (oil not included). Output pressure:3.2Kpa(0.46psi)Air pressure output：External air source Power supply: DC12V,Vehicle battery Air pressure output: need to connect external air pump Test oil capacity: 10ml Main Unit Dimension:180x135x100mm Package weight: 2.7kg Main Unit weight:1.7kg How to do leakage test？ 1. Fill 20ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover. 2. Disconnect the pipe that needs to be connected with detector. 3. Connect detector with DC12V battery, turn on the power switch, and the detector starts to work. 4. In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.Packing List : 1pc * AUTOOL SDT103 Car Smoke Leak Detector Main Unit 1pc * Black Airbag 1pc * EVAP Special Connector 1pc * Standard Cone Adapter 1pc * Power Cord Clamp 1pc * Valve Core Wrench 1pc * Test Oil Refill Bottle(oil not included) 1pc * Smoke Hose 1pc * User ManualAUTOOL Upgraded SDT 205S Car Smoke Leak Detector is a professional auto pipe leak detect tool. It will help us position cars motorcycles leakage on the pipe systems quickly and exactly,such as Intake System Test, Exhaust Systems Test, Cooling System Test, Crankcase system test，Car Sealing Test, Fuel Tank System Test, Turbo System Test，Various Pipe Fittings Test.Dual Test Modes Air mode: It is possible to diagnose leaks through the pressure gauge without no smoke required. It is provided with a flow meter set from 1 to 6 levels to adjust the airflow and thus accurately measure tiny leaks (even up to 0.25 mm). Smoke mode: This mode can be used when a leak is detected. This smoke detector can produce smoke within 10 seconds to help you find pipe leaks quickly and accurately.Visual flow meter & adjustable knob Smoke output flow: 0-6 L/min, level gauge with an adjustable knob, easy to observe and operate.Advanced Technology It works on the EVAP system. (Provided with another version that specially designed for EVAP system). Equipped with dual flow meters for accurate data display & Independently controlled Air mode and Smoke mode.Overheat & Anti-frost Protection This smoke detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power to secure the safety of both the operator and device.Quick leak diagnosis by pressure display No leaks: if the value of the pressure gauge remains the same, it means there is no leak in the pipeline system. Small leak: if the value of the pressure gauge drops a bit, it indicates a small leak in the pipeline system. Serious leak: if the pressure gauge reaches zero, it indicates a large leak in the pipeline system.WIDE RANGE OF APPLICATION For detecting the leakage of pipe systems on cars, motor- cycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats. With flowmeter display, suitable for All Autos Packing List：1pc * AUTOOL SDT 205S Car Smoke Leak Detector Main Unit1pc * Hook (with hand-tighten nuts)1pc * Rubber Connect Parts1sets * Hard Rubber Hose Plug (with serial specification)1sets * Soft Rubber Hose Plug (with serial specification)1pc * Standard Cone Adapter1pc * Universal Airbag Adapter1pc * Power Cord Clamp1pc * Valve Core Wrench1pc * Test Oil Refill Bottle(oil not included)1pc * EVAP Special Connector1pc * Smoke Hose1pc * User ManuaAUTOOL SDT208 Car Smoke Leak Detector EVAP System Tester—an marvelously professional auto pipes Leak Smoke Tester, in line with the technical specifications of the car repair shop EVAP test. SDT208 greatly increases efficiency and helps us locate leaks from cars and motorcycles on our piping system within minutes, quickly and exactly, such as EVAP System Test、Intake System Test、Exhaust Systems Test， Turbo System Testing, Crankcase system test，Car Sealing Test, Various Pipe Fittings Test.SDT208 ADVANCED TECHNOLOGY In line with the technical requirements of the car repair shop EVAP test. The SDT208 can detect tiny leak holes up to 0.5mm and has a hold-limit pressure protection function in EVAP mode, so as to protect vehicle pipes from damages.UNIQUE DESIGN The SDT208 is equipped with two pressure control modules, respectively,Standard Mode and EVAP Mode. And two independent switches (Air &Smoke), which can be used for a wide range of leak detection needs. Provided with three gauges includes Oil Level, Air Flow & Air Pressure for accurate data display.WIDE RANGE OF APPLICATIONS It supports 12V/24V car batteries. For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks, and speedboats boats. Suitable for all car models.OPERATION SAFETY The SDT208 owns high temperature protection and hold -limit pressure. During operation, if the equipment senses the temp. above 75°C, the power supply will be automatically power off.DUAL OUTPUT PRESSURE If the air pressure exceeds the Standard mode (35psi) /EVAP mode (10psi), the air pump will stop working. This effectively ensures the safety of operators and equipment.PROFESSIONAL EVAP DETECTION In line with the technical requirements of the car repair shop EVAP test. The SDT208 can detect tiny leak holes up to 0.5mm and has a hold-lim it pressure protection function in EVAP mode, so as to protect vehicle pipes from damages. Packing List： 1pcs * AUTOOL SDT208 Car Smoke Leak Detector EVAP System Tester Main Unit 1pcs * Rubber Connect Parts 1sets * Hard Rubber Hose Plug (with serial specification) 1sets * Soft Rubber Hose Plug (with serial specification) 1pcs * Standard Cone Adapter 1pcs * Universal Airbag Adapter 1pcs * Power Cord Clamp 1pcs * Valve Core Wrench 1pcs * Test Oil Refill Bottle(oil not included) 1pcs * EVAP Special Connector 1pcs * Smoke Hose 1pcs * User Manual VISIT OUR STOREMORE PRODUCTSMORE PRODUCTS 3 WARRANTY&SERVICEFIVE STAR FEEDBACKVISIT OUR STORE MORE PRODUCTS MORE PRODUCTS 3 WARRANTY&SERVICE FIVE STAR FEEDBACK

Continue lendoEVAP Smoke Machine Leak Detector Automotive Fuel Pipe System Vacuum Smoke Tester

ANCEL EVAP Smoke Machine for Leaks Test in Vacuum Fuel EVAP & Other Cars System

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

Professional ANCEL S100 S200 S300 Series Automotive EVAP Smoke Machine Leak Detector For Car Motor All Vehicle Leak Diagnostic Detector Tools Kit for Leaks Test in Vacuum,Fuel,EVAP and Other Cars System,S200 & S300 with Built-in Air Pump and Pressure Gauge.

Continue lendoANCEL EVAP Smoke Machine for Leaks Test in Vacuum Fuel EVAP & Other Cars System

FOXWELL SD101 Car Leak Detector Fuel Oil Pipe Leakage Smoke Machine Tester US

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

Foxwell SD101 Is an Entry-level Pipeline Leak Detection Tool. Smoke leak detector, because of the characteristics of smoke, can carry out leak detection on the whole set of pipelines, visual operation, omni-directional, no dead angle, and no leakage point.

Continue lendoFOXWELL SD101 Car Leak Detector Fuel Oil Pipe Leakage Smoke Machine Tester US

EVAP Smoke Machine Leak Detector Automotive Fuel Pipe Vacuum Diagnostic Tester

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

OBD trouble codes related to EVAP system include p0443-0457/p0465-0469. If sucn trouble codes are detected, EVAP system should be tested. EVAP, E-G-R Test. Smoke leak detector, because of the characteristics of smoke, can carry out leak detection on the whole set of pipelines, visual operation, omni-directional, no dead angle, and no leakage point.

Continue lendoEVAP Smoke Machine Leak Detector Automotive Fuel Pipe Vacuum Diagnostic Tester