12V Car Automotive Vehicleprofessional Battery Tester Digital Vehicle Analyzer 2000CCA Charging Cranking System Tester Battery Cranking Test, load test. Test all automotive cranking lead acid battery, including ordinary lead acid battery, AGM flat plate battery, AGM spiral battery, and Gel battery, etc.
• Test batteries from rated from 100 to 2000CCA. FOXWELL BT705 100-2000CCABattery Analyzer Tester forCars Duty Trucks 12V-24V Car Cranking and Charging System Test Diagnostic Tool. FOXWELL BT705 100-2000CCA Battery Analyzer Tester Function.
Why choose BST100 products?1.Small compact design, scan faster and indicates test results directly. Even a beginner can use this unit to analyze any 12V batteries healthy, tells you everything about the battery: voltage, charge, cranking power, and how much life is left in the battery (level of Ohm resistance). Does it quickly and precisely. 2.Much wider test range (100-2000 CCA) and more accurate compared to its competitors. Test results based on CCA,BCI,CA,MCA,JIS,EN,DIN,SAE,GB and IEC Standards. 3.Provides check the Alternator's charging and Starter's cranking conditions. Vehicle charging system test is also available, including load voltage, unloaded voltage, ripple status and charging system status. 4.The Ancel BST100 battery tester is well built with a large LCD display, indicates test results directly. no internal batteries required and gets the power directly from the 12V battery. 5.It's equipped with cable and made of a very thick flexible insulator, much safer than others selling on the marketplace. There are 4 buttons on BST100, The up/down button for scrolling the menu. The Enter and Exit button allow for navigation back and entering menu. ANCEL BST100 Function1.Identify battery status Good or Replace 2.Check Battery Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating. 3.Check Internal resistance value (Ohm) 4.Display battery life in percentage (%) 5.Battery Cranking Test, load test 6.Battery Charging Test, Ripple Test 7.Support battery ripple test and review test data BST100 12V Battery Tester Features1.Fast and smooth running speed with STM-32 chip set hardware 2.Accurate test results, using high precision amplifier and calibrated by professional battery testing tool, BST100 reading accuracy up to 99%. 3.Wide testing range cover from CCA 100- 2000 , 3- 220 AH, best in the market. 4.Industry initiative graphical battery voltage real time monitoring, can be analysis battery data more accurate. 5.Unique battery results display in percentage and meter mode. 6.Test all automotive cranking lead acid battery, including ordinary lead acid battery, AGM flat plate battery, AGM spiral battery, and Gel battery, etc. 7.Polarity reverse connection protection, reverse connection will not damage the tester or affect the vehicle and battery. 8.Directly test the battery with loss of electricity, no need to full charge before testing. 9.Testing standards include currently the world's majority of battery standards, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB. 10.BST100 is used to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL EPB cell The BST100 Advantage:Simple and easy to useTests batteries on and off the vehicleAccurate results in millisecondsBattery life analysisAnalysis results: Good or ReplaceLarge easy to read LCD screenTest results based on CCA,BCI,CA,MCA,JIS,EN,DIN,SAE,GB and IEC StandardsQuick test - inputs battery volume (AH), then shows battery statusVehicle cranking system test - cranking time, voltage and statuVehicle charging system test—load voltage, unloaded voltage, ripple status, and charging system statusAncel BST100 Car Battery Tester Application Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported.On Nov 1, 2023 at 07:36:07 PDT, seller added the following information:
ANCEL BST100 Function. ANCEL BST100 Features. BST100 is used to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL EPB cell.
12V Digital Car Battery Tester Alternator Motorcycle Battery Tester with 6 LED Lights Display. Attach the cable clip of the red cable to the plus point(+）of the battery and the cable clip of the black cable to the minus point(-)of the battery. ).
12V Digital Car Battery Tester Alternator Motorcycle Battery Tester with 6 LED Lights Display - 12V led digital battery mate is a simple but efficacious battery testing tool which can determine the battery state, it's easy to useand be understood. Main Functions: 1. Checking charge level 2. Functional test of dymano 3. Checking battery starting capability 4. Battery overload display Connections: Attach the cable clip of the red cable to the plus point(+）of the battery and the cable clip of the black cable to the minus point(-)of the battery. Different Led display to show Battery Sate: Display 1: All Led lights off; Testing results: none Charging Voltage, Dead Battery Display 2:”ON” led twinkling, other Led off; Testing results:4.6-11.2V Charging Voltage, Engine being hardly turned on, turn off all electrical equipment and charge battery immediately. Display 3: ”ON” Led ON,”LOW” Led twinkling; Testing results:11.2-11.6V Charging Voltage, Low charged Battery, being charged immediately. Display 4:”Low” led on, ”Middle” led twinkling; Testing results: 11.6-12.2V Charging Voltage, Middle charged Battery, better being charged sooner. Display 5: “Middle” Led on; Testing results: 12.2V Charging Voltage, Middle charged Battery, better being charged. Display 6: “Middle” Led on, ”Full” Led twinkling; Testing results: 12.2-13.1V Charging Voltage, Middle charged Battery, better being charged. Display 7: “Full” Led on, ”Good” Led twinkling; Testing results: 13.1-14V Charging Voltage, Good battery, Full Charged Display 8:”Good” Led on; Testing results: 14V Charging Voltage, Good battery, Full Charged. Display 9:”Good” Led on, “Fault” Led twinkling; Testing results: 14-16V Charging Voltage, Battery may be damaged, Check the engine and tester. Display 10:“Fault” Led on; Testing results: Above 16V Charging Voltage, fault Battery. Feature: 6-LED display, clearly present the alternator and battery state. Two testing clips for safe and easy operation. Small size and light weight, convenient to carry. Fit for all 12 V car, motorcycle battery etc. With a good chip inside, not easy to get hot on the surface. 6 Led Lights: Alternator state First light (Red): Fault Second light (Gree): Good Battery State First light (Green): Full Second light (Yellow): Middle Third light (Red): Low Check Before charge First light (green): OK Specifications: LED quantity: 6 (2 red, 3 green, 1 yellow) Material of wire: 0.06 square millimeter copper Max. voltage / current: 12V / 15A Length of wire: 14.2inchs/36.2cm Using: Improve driving safety Material : Plastic, Copper Color : Gray Product size (L x W x H) : 4.7 x 1.9 x 0.75inches/ 12 x 4.8 x 1.9 cm Package size (L x W x H) : 5.6 x 2.2x 1.4 inches / 13.5 x 5.6 x 3.6 cm Packing list: 1 x 12V battery tester 1 x user manual On Aug 2, 2023 at 02:30:42 PDT, seller added the following information:
12V Digital Car Battery Tester Alternator Motorcycle Battery Tester with 6 LED Lights Display. Different Led display to show Battery Sate Attach the cable clip of the red cable to the plus point(+）of the battery and the cable clip of the black cable to the minus point(-)of the battery. ).
12V Digital Car Battery Tester Alternator Motorcycle Battery Tester with 6 LED Lights Display. Battery overload display. 6-LED display, clearly present the alternator and battery state. Alternator state.