Fork Oil Level Gauge Syringe Tool Front Suspension Motorcycle Motorbike US STOCK

  • Autor do post:
  • Post publicado:
  • Categoria do post:
  • Comentários do post:0 comentário

Fork Oil Level Syringe Tool Easy for fork oil level adjustment The Stainless rod is lasered with measurements from 0-300mm, The measurement scales are not just painted on it, they are marked by laser,fading away? No way!!! And the rod is made of 304 Stainless.Bending it easily? No way!!! Syringe has a capacity of 60ml Can be used on bicycles equipped with front suspension Material: Syringe: PE,"DISCARD AFTER USE" does not apply Tube: not PVC but silicone,more flexible Rod Metal: not alloy but 304Stainless,and surface polished,so you can easily identify your oil level.

Continue lendoFork Oil Level Gauge Syringe Tool Front Suspension Motorcycle Motorbike US STOCK

ADAS Calibration Tool Reflective Board US STOCK for Vehicle Centerline Alignment

  • Autor do post:
  • Post publicado:
  • Categoria do post:
  • Comentários do post:0 comentário

Adjust the laser device as needed. Use the auxiliary mirror to align the longitudinal laser beam with the central axis of the reflective board. Note : If vehicle ground clearance is too low, swap the positions of the five-line laser and the reflective board.

Continue lendoADAS Calibration Tool Reflective Board US STOCK for Vehicle Centerline Alignment

US Stock EVAP Smoke Diagnostics Tester Exhaust Intake Boot Cone Adapter for Leak

  • Autor do post:
  • Post publicado:
  • Categoria do post:
  • Comentários do post:0 comentário

- HOW TO USE? How to make your smoke leak testing more easier while we are facing larger openings? Just fit the cone adapter into diagnostic site and inject your smoke through the adapter hose. - THE ADAPTER’S DIFFERENCES: ▪It's made of silicone,anti-corrosion. ▪It will have a long service life. ▪It is smoother ,brighter ,softer and will not be harder and harder after a long time service. ▪It has a better leakproofness because of the silicone material. - SIZE: Made for larger openings with a diameter up to 3.2 inches (82mm) and as small as 1.2 inch (31mm).It fits almost all exhaust tips and intake boots,but just in case,please make sure your opening size is no lager than 3.2 inches (82mm) before you buy it.

Continue lendoUS Stock EVAP Smoke Diagnostics Tester Exhaust Intake Boot Cone Adapter for Leak

US STOCK Radar Aiming Reflector Target ADAS Calibration Tool For Honda Toyota GM

  • Autor do post:
  • Post publicado:
  • Categoria do post:
  • Comentários do post:0 comentário

ANGSO-AUTO Radar Aiming Reflector Target ADAS Calibration Tool For Honda Toyota Kia USA STOCK 【Included :1*Reflector & 1*set of Stand】 - 1*Billet Aluminum Radar Reflector - 1*set of Type18-8 STAND Except this ANGSO-AUTO ADAS CALIBRATION TOOL Note: The height of the stand is 32Inches / 81cm. Your DIY-assemblings will be needed.Just a piece of cake. ●Make sure all dimensions are taken properly first so that you can set your radar target on the right position.Normally using an extra laser to place the DEAD CENTER is necessary. ●Certain calibration image files will not be provided because they differ from different types of vehicles.

Continue lendoUS STOCK Radar Aiming Reflector Target ADAS Calibration Tool For Honda Toyota GM

LAUNCH Motorcycle Diagnostic Connector Kit 2.0 with Activation Card US Stock

  • Autor do post:
  • Post publicado:
  • Categoria do post:
  • Comentários do post:0 comentário

Launch CRP919E BT/ CRP919X BT. Launch X431 V V5.0. Launch X431 V+ V5.0. Launch Pro3S+ V5.0. 1pc x For Honda motorcycle 4PIN diagnostic connector, ROHS. Launch X431 PRO3 APEX. Launch X431 Pro Elite. 1pc xFor Kawasaki motorcycle 4+6PIN diagnostic connector, ROHS.

Continue lendoLAUNCH Motorcycle Diagnostic Connector Kit 2.0 with Activation Card US Stock

US STOCK ADAS Calibration Assist Mirror Centerline Identifier for Car Alignment

  • Autor do post:
  • Post publicado:
  • Categoria do post:
  • Comentários do post:0 comentário

✔️ Application : Adjust the laser mirrors on either side of the vehicle to swiftly pinpoint the centerline. 🌟 Revolutionary Laser Guidance : Simplify operations by guiding laser beams, allowing you to effortlessly identify the centerline on your vehicle's badge.

Continue lendoUS STOCK ADAS Calibration Assist Mirror Centerline Identifier for Car Alignment

US STOCK Cone Nozzle Adapter For EVAP Smoke Machines Emissions Service Port Test

  • Autor do post:
  • Post publicado:
  • Categoria do post:
  • Comentários do post:0 comentário

Store CategoriesStore CategoriesNew Jersey StockADAS Calibration ToolFork Oil Level Gauge ToolEVAP ToolOthersADAS Calibration ToolOtherUS STOCK Cone Nozzle Adapter For EVAP Smoke Machines Emissions Service Port Test Product Description Product Description Type: Cone Nozzle Adapter For Evap Smoke Machines Service Port intake Emission Testing High Quality: Made of new high strength aluminum alloy material with a high quality elastic silicone rubber tube (59”/150cm long,ID:¼”/6mm),and it has absolutely no nasty smell. You can easily jam into0.25”-0.4” OD smoke outlet holes. Widely Compatible: For all smoke/vacuum leak detection machines. The smoke nozzle is easy to jam into any fuel or vacuum hose connection where needed to test for leaks with your smoke machine. Feature: · The smoke nozzle is easy to jam into any fuel or vacuum hose connection where needed to test for leaks with your smoke machine. The smoke cone nozzle can fits into 0.28”- 0.58” hose(7.5mm-14.5mm). ·The barb(0.34”OD) end of this nozzle is already attached with a 59”/1.5m long elastic silicone rubber tube for you. And please note that the tube is a kind of elastic silicone,so it can basically be plugged into 0.25”- 0.4” smoke outlet holes. All you need to do is to make sure your smoke machine outlet hole is within 0.25”- 0.4". What you Get: 1* Smoke Cone Nozzle Adapter (Billet Aluminum Anodized Red) 1* Silicone Rubber Tube(1.5m) Note: The ruler is just for visual reference,it is not included. Payment PolicyShipping PolicyReturns PolicyContact UsUSA STOCKPayment PolicyWe accept all payment methods recommended by eBay like payoneer,credict card ect.Shipping PolicyWe ship all our packages with valid tracking number within 1-2 business days after payment is received. Returns PolicyIf you receive defective item, please kindly notify us within 30 days. We will guide you the returning instruction for replacement or refundContact UsIf you are satisfied with the product, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible sellerUSA STOCKThe parcel will be shipped from New Jersey so it will save you much time to receive itCopyright © 2023 Dianxiaomi

Continue lendoUS STOCK Cone Nozzle Adapter For EVAP Smoke Machines Emissions Service Port Test

US STOCK Automotive EVAP Vacuum Smoke Machine Diagnostic Leak Detection Testers

  • Autor do post:
  • Post publicado:
  • Categoria do post:
  • Comentários do post:0 comentário

EVAP Associated. P0455 - Evaporative Emission System Leak Detected Large Leak Detected. P0456 - Evaporative Emissions System - Small leak detected. HIGH QUALITY MANUAL HAND SMOKE PUMP. - 1 PP pump: 4.7"OD,high quality and has more stronger output smoke than the normal size which is less than 4".

Continue lendoUS STOCK Automotive EVAP Vacuum Smoke Machine Diagnostic Leak Detection Testers

OBDSTAR P004 E-CU Clone Jumper BENCH Cable For MP001 Set DC706 US Stock

  • Autor do post:
  • Post publicado:
  • Categoria do post:
  • Comentários do post:0 comentário

OBDSTAR P004 E-CU Clone Jumper For MP001 Set DC706. 1pc x Jumper Wire (including 5 specifications). 1pc x BENCH -B V2 E-CU FLASHER BENCH CABLE. 1 Year free repair for the devices. We are specialized dealer of On-Board Car Diagnostic tools and automotive electronics for more than 10 years.

Continue lendoOBDSTAR P004 E-CU Clone Jumper BENCH Cable For MP001 Set DC706 US Stock