315MHz 433MHz Universal Programmable Tire Pressure Sensors. See pictures. suggest you do this before you even buy the new sensors, so you know. This is the black rubber valve stem with sensor assembly.
Autel MaxiTPMS TS501 Autel MaxiTPMS TS508 Tire Pressure Sensor is Important. How Important? TPMS stands for "Tire Pressure Monitoring System". Each car tire is equipped with a TPMS sensor connected to the tire valve, which is mainly used to automatically monitor the real-time tire pressure, temperature, and acceleration information and alarm drivers stay on top of tire leaks and low pressure, making them aware of any issues before leading to much more severe issues such as: the increased risk of tire blow-out / shorter lifespan of tires / faster tire wear-out / poor driving experience / bad fuel economy Whereas, all these above problems can be effectively avoided if you use this Autel MX-Sensor to monitor tire pressure regularly. This Autel TPMS sensor has the following characteristics and performs the same functions as the OEM sensors but is more affordable: 2-in-1 frequency: 315MHZ+433MHz. 2 interchangeable valve: metal & rubber. 5-Year battery life & 98% of coverage. 100% copy the original ID. Programmable press-in MX-Sensors, easy to install. Measure the tire pressure in the car tire. Measure the temperature inside the car tire. Measure the acceleration in the car tire. Meet SAE J1205/J1206 standards. Autel TPS218 - Dual Frequency 315MHz+433MHz Programmable TPMS Sensor The Main highlights for Autel MX-Sensors: 2 in 1 TPMS Sensor: Combining 2 frequencies (315MHz & 433MHz) into Autel MX-Sensors. The common sensors on the market have only one frequency. Metal & Rubber Valves: Exclusive press release valve provides the interchangeable rubber & metal valve stems for easy removal and replacement by hand without a tool. 100% ID Clone-able: Autel MX-Sensors can 100% copy the original sensor ID and replace the original one in the same position without relearning procedure when programmed. Programmable Sensors: All the Autel MX-Sensors can be activated/programmed/relearned with Autel TPMS tools (TS408/TS508/TS601/ITS600/MK808TS/MP808TS/etc.). Performing the same functionality as the OEM sensors but more cost-effective. Wireless Programming: Thanks to the powerful signal strength, up to 20 MX-Sensors can be wirelessly programmed simultaneously even already mounted to the wheel. 99% Vehicle Coverage: Universal Autel sensors cover 98% of vehicle models. No more need to stock a large number of sensors for various vehicles. 5 Year Battery Life: 12g Lower MX-Sensor offers longer battery life than most sensors on the market. Quality Control: Tested & certified to meet SAE J1205/J1206 standards. Each sensor owns a series number for quality control and takes no charge from manufacturing defects for a period of 24 months or 24,000 miles. User-friendly Design & Easy Installation Steps Fast to Install the Autel MX-Sensors and Quickly Replace the Original Sensors Loosen The Tire: Remove the valve cap and core and deflate the tire. Demount The Tire: Clamp the tire onto the tire changer, and adjust it to the right position to dismount the bead. Dismount The Original Sensor: Remove its cap, screw nut, and washer from the valve stem, and then remove the sensor assembly from the rim. Assemble The New Autel MX-Sensors to The Wheel. Mount The Tire Bead into The Wheel When the programmed Autel MX-Sensors work well with the TPMS system, it brings great benefits to you. Monitor whether the tires are properly inflated or not on the vehicle's dashboard. Proper tire pressure inflation optimizes tire performance optimize the tire's traction shorten the braking distance improve the fuel economy slow the wear of the tread area Notify the drivers with a flat tire warning light timely to avoid possible danger. Facilitate all users to replace TPMS sensor timely and reduce extra cost for your car. 99% of Worldwide Vehicle Coverage, No Longer Pay More for Sensor Replacement Good news! The newly released Autel TPS218 MX-Sensors feature two types of valves (metal & rubber ) and two frequencies (315MHz & 433MHz ), which can better fit for needs of DIYers, tire dealers, and repair shops. Thanks to its 98% of mainstream vehicle coverage & effective cost, this Autel TPMS sensors can perfectly replace 98% of OE-level sensors and save at least half of the bucks for you. America: Compatible with Ford, Lincoln, Chrysler, Dodge, Jeep, GM, Cadillac, Chevrolet, Buick, GMC, etc. Asia: Compatible with Suzuki, Mazda, Lexus, Hyundai, Infiniti, Nissan, Mitsubishi, etc. Europe: Compatible with BMW, Bentley, Bugatti, VW, Skoda, Porsche, Opel, Fiat, Peugeot, Citroen, Volvo, Mini, Saab, Land Rover, Renault, etc. Note: You can check the vehicle compatibility before purchasing. TPMS Activation Tool TS408 TPMS Relearn Tool TS508 TPMS Programming Tool TS601 TPMS Expert + Professional OBD2 Auto Scanner Advanced TPMS Scanner with 28+ Special Functions Advanced TPMS Scanner with ECU Coding Active Test Cost 149 279 299 569 649 949 Sensor Activation ✓ ✓ ✓ ✓ ✓ ✓ Autel Sensor Programming Copy by Activation; Copy by Manual; Auto Create Copy by Activation; Copy by Manual; Auto Create; Copy by OBD Copy by Activation; Copy by Manual; Auto Create; Copy by OBD Copy by Activation; Copy by Manual; Auto Create; Copy by OBD Copy by Activation; Copy by Manual; Auto Create; Copy by OBD Copy by Activation; Copy by Manual; Auto Create; Copy by OBD Sensor Relearn Automatic Relearn; Stationary Relearn Automatic Relearn; Stationary Relearn; OBD Relearn Automatic Relearn; Stationary Relearn; OBD Relearn Automatic Relearn; Stationary Relearn; OBD Relearn Automatic Relearn; Stationary Relearn; OBD Relearn Automatic Relearn; Stationary Relearn; OBD Relearn Program 1-20 Sensor Up to 16 Sensors Up to 16 Sensors Up to 16 Sensors Up to 20 Sensors Up to 16 Sensors Up to 16 Sensors OBD2 Scanner ✓ ✓ ✓ ✓ All System Diagnostics ✓ ✓ ✓ Maintenance Functions 4+ 28+ 36+ Bi-directional Control ✓ ✓ ECU Coding ✓ why you should choose this autel mx sensor? Autel MX-Sensor 2 in 1 SensorAutel 2 in 1-Sensor combines both 315MHz + 433MHz frequencies into one TPMS sensor with the highest industry vehicle coverage. The exclusive MX-Sensor patented PRESS release valve stem design, allows rubber and metal valve stems to freely interchange by hand, without requiring a tool for sensor head fitting. Built to match or exceed OEM sensors in frequency strength and durability, MX-Sensors are 100% ID clone-able with no relearn required and offer latest model vehicle coverage because they quickly update during installation with an Autel wireless pro~gramming tool.Autel MX-Sensor 1 Sensor Features:1. 315MHZ & 433MHZ 2in1This tire pressure monitoring sensor (for TPMS) has been manufactured to combine both 315 MHz and 433 MHz applications in one sensor to greatly simplify users’ inventory management and lower the investment as well as sales loss. And it is built to perform like OE sensors in terms of signal, durability and functionality.2.Maximum Signal Strength Wireless pro~grammingThe extraordinary sensor signal strength allows AUTEL 1-Sensor to be easily pro~grammed wirelessly even when the sensors have already been mounted to the wheel. And with strong signal strength, now up to 16 sensors can be pro~grammed in one session with Autel latest TPMS tools.3.Exclusive Press Release Interchangable Valve StemsThe patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.4.Superior Battery Reliability lower SensorWith the highest quality materials and advanced TPMS technology, AUTEL 1-Sensor provides superior battery life and reliability, to match OE sensor battery performance. The 1-Sensor body weighs only 13g, making it significantly lighter than most sensors in the market, which ensures better sensor stability and performance.5.98% Vehicle CoverageAn easy to use and cost effective necessity for any shop performing TPMS repairs, the Autel 1-SKU sensor has the long ability to cover over 98% of all OE sensors on the market, to support up 90% of North American, European and Asian brands. On the shop level, needing only 1-Sensor to service nearly every TPMS equipped vehicle means lower repair cost and higher install efficiency6.Strict Quality Control Autel guarantees MX-Sensor are free from manufacturing defects for a period of 24 months or 24,000 miles, whichever option comes first. Each Autel MX-Sensor has a series number for assuring quality control. The series number is imprinted on the sensor or can be read with Autel TPMS tools. With the series number, Autel can track the sensor quality from our factory manufacturing to ensure only the highest quality parts are installed. How To Install This Autel MX-Sensor 1 Sensor?1.Loosening the tire: Remove the valve cap and core and deflate the tire. Use the bead loosener to unseat the tire bead.2.Dismounting the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to dismount the bead.3.Dismounting the sensor: Remove the screw nut from the valve stem, and then remove the sensor assembly from the rim.4.Mounting sensor and valve: Connect the sensor body and valve stem at a suitable angle (normally use the maximum angle of 30 degrees) and tighten the screw.5.Remove the screw nut from the valve stem.6.Slide the valve stem through the valve hole of the rim with the sensor on the inside of the rim.7.Tighten the screw-nut with 4.0 nm with the help of the positioning pin.8.Mounting the tire: Place the tire on the rim, make sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.Notice:·The TPMS sensor assemblies are replacement or maintenance parts for vehicles that have a factory installed TPMS.·Make sure to pro~gram the sensor by Autel sensor pro~gramming tools for your specific vehicle make, model and year before installation.·Do not install pro~grammed TPMS sensor in damaged wheels.·In order to guarantee optimal function, the sensor may only be installed with original valves and accessories provided by Autel.·Upon completion of installation, test the vehicle TPMS systems using procedures described in the original manufacturer’s user guide to confirm proper installation.·Each time a tire is serviced or dismounted, or if the sensor is removed or replaced, it is mandatory to replace the rubber grommet, washer, nut and valve core with our parts to ensure proper sealing. It is mandatory to replace the sensor if it is extremely damaged.·Autel MX-Sensor arrive blank and must be pro~grammed with an Autel TPMS service tool prior to installation or at 0 PSI/kPa·Do not race with the vehicle on which the Snap-in MX-Sensor is mounted, and always keep the drive speed under 180km/h for Metal Valve sensor, or 240km/h for Rubber Stem sensor.Autel 1 Sensor Specification:·Battery Life: ≥5 years·Operating Temperature: -40°C – 125°C·Storage Temperature: -40°C t – 125°C·Operating Humidity: ≤90%·Operating Frequency: 315 MHz~433MHz·Max. Pressure range: 800 kPa·Temperature Reading Range: -40°C – 125°C·Temperature Reading Accuracy: ±5°C·G Sensor Reading Accuracy: ±15%·Transmission Power: 5-8dBm·Battery: 3.0 V·Dimensions: Approx. 42.4*24.1*16.0 mm·Weight of Sensor without Valve: 13gPackage List:1x MX-Sensors1x User Manual
MX-Sensors (315MHz Rubber), the pro/grammable universal sensors, are both smart and efficient specially built for sensor replacement to perform like OE sensors, in terms of signal interval, durability and functionality supporting up to 99% of the US and Canadian vehicles. The 2-SKU sensor solution that covers over 98% of all OE sensors on the market will greatly simplify your inventory management and lower investment and sales loss. AUTEL VALUE ADVANTAGE - Covering 98% of all OE sensors on the market - 2 sensor types to reduce inventory (two valve types available) - Wireless sensor pro/gramming with Autel TPMS service tools - 100% ID clone-able sensor with no re-learn required - Independently tested and certified to meet SAE standards Autel MX-Sensor 2 in 1 Sensor: Autel 2 in 1-Sensor combines both 315MHz + 433MHz frequencies into one TPMS sensor with the highest industry vehicle coverage. The exclusive MX-Sensor patented PRESS release valve stem design, allows rubber and metal valve stems to freely interchange by hand, without requiring a tool for sensor head fitting. Built to match or exceed OEM sensors in frequency strength and durability, MX-Sensors are 100% ID clone-able with no relearn required and offer latest model vehicle coverage because they quickly update during installation with an Autel wireless pro/gramming tool. Features: 1. 315MHZ & 433MHZ 2in1 This tire pressure monitoring sensor (for TPMS) has been manufactured to combine both 315 MHz and 433 MHz applications in one sensor to greatly simplify users’ inventory management and lower the investment as well as sales loss. And it is built to perform like OE sensors in terms of signal, durability and functionality. 2. Maximum Signal Strength Wireless pro/gramming The extraordinary sensor signal strength allows AUTEL 1-Sensor to be easily pro/grammed wirelessly even when the sensors have already been mounted to the wheel. And with strong signal strength, now up to 16 sensors can be pro/grammed in one session with Autel latest TPMS tools. 3. Exclusive Press Release Interchangable Valve Stems The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy. 4. Superior Battery Reliability lower Sensor With the highest quality materials and advanced TPMS technology, AUTEL 1-Sensor provides superior battery life and reliability, to match OE sensor battery performance. The 1-Sensor body weighs only 13g, making it significantly lighter than most sensors in the market, which ensures better sensor stability and performance. 5. 98% Vehicle Coverage An easy to use and cost effective necessity for any shop performing TPMS repairs, the Autel 1-SKU sensor has the long ability to cover over 98% of all OE sensors on the market, to support up 90% of North American, European and Asian brands. On the shop level, needing only 1-Sensor to service nearly every TPMS equipped vehicle means lower repair cost and higher install efficiency 6. Strict Quality Control Autel guarantees MX-Sensor are free from manufacturing defects for a period of 24 months or 24,000 miles, whichever option comes first. Each Autel MX-Sensor has a series number for assuring quality control. The series number is imprinted on the sensor or can be read with Autel TPMS tools. With the series number, Autel can track the sensor quality from our factory manufacturing to ensure only the highest quality parts are installed. Install This Autel MX-Sensor 1 Sensor?1.Loosening the tire: Remove the valve cap and core and deflate the tire. Use the bead loosener to unseat the tire bead.2.Dismounting the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to dismount the bead.3.Dismounting the sensor: Remove the screw nut from the valve stem, and then remove the sensor assembly from the rim.4.Mounting sensor and valve: Connect the sensor body and valve stem at a suitable angle (normally use the maximum angle of 30 degrees) and tighten the screw.5.Remove the screw nut from the valve stem.6.Slide the valve stem through the valve hole of the rim with the sensor on the inside of the rim.7.Tighten the screw-nut with 4.0 nm with the help of the positioning pin.8.Mounting the tire: Place the tire on the rim, make sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.Notice:·The TPMS sensor assemblies are replacement or maintenance parts for vehicles that have a factory installed TPMS.·Make sure to pro~gram the sensor by Autel sensor pro~gramming tools for your specific vehicle make, model and year before installation.·Do not install pro~grammed TPMS sensor in damaged wheels.·In order to guarantee optimal function, the sensor may only be installed with original valves and accessories provided by Autel.·Upon completion of installation, test the vehicle TPMS systems using procedures described in the original manufacturer’s user guide to confirm proper installation.·Each time a tire is serviced or dismounted, or if the sensor is removed or replaced, it is mandatory to replace the rubber grommet, washer, nut and valve core with our parts to ensure proper sealing. It is mandatory to replace the sensor if it is extremely damaged.·Autel MX-Sensor arrive blank and must be pro~grammed with an Autel TPMS service tool prior to installation or at 0 PSI/kPa·Do not race with the vehicle on which the Snap-in MX-Sensor is mounted, and always keep the drive speed under 180km/h for Metal Valve sensor, or 240km/h for Rubber Stem sensor.Autel 1 Sensor Specification:·Battery Life: ≥5 years·Operating Temperature: -40°C – 125°C·Storage Temperature: -40°C t – 125°C·Operating Humidity: ≤90%·Operating Frequency: 315 MHz~433MHz·Max. Pressure range: 800 kPa·Temperature Reading Range: -40°C – 125°C·Temperature Reading Accuracy: ±5°C·G Sensor Reading Accuracy: ±15%·Transmission Power: 5-8dBm·Battery: 3.0 V·Dimensions: Approx. 42.4*24.1*16.0 mm·Weight of Sensor without Valve: 13gPackage List:1x MX-Sensors1x User Manual On Apr 25, 2023 at 23:54:57 PDT, seller added the following information:
- Covering 98% of all OE sensors on the market - 2 sensor types to reduce inventory (two valve types available) - Wireless sensor pro/gramming with Autel TPMS service tools - 100% ID clone-able sensor with no re-learn required - Independently tested and certified to meet SAE standardsAutel TPMS MX-Sensor 315MHz 433MHz 2 In 1 Universal Programmable Tire Pressure Autel MX-Sensor with 2-in-1 Frequency 315 & 433MHz Programmable TPMS Sensor Coming with exclusive 2-in-1 315 & 433 MHz dual frequency and 99% of coverage for global vehicles, Autel MaxiTPMS MX-Sensor gets peace of mind that the fit, form, and function are up to the high standards and specifications of the OEM quality you need.2-in-1 Radio Frequency: Combine 315MHz+433MHz into one Autel MX-Sensor for transmitting tire pressure data.99% of Vehicle Coverage: Autel MX-Sensor is universal for global American, Asian, and European vehicles (75+ makes and 1400+ models compliant.). More cost-effective than manufacturer sensors.Unlimited Programming: All the Autel MX-Sensors can be activated/programmed/relearned with Autel TPMS tools (TS408/TS508/TS601/ITS600/MK808TS/MP808TS/etc.).Wireless Connection: Super wireless signal allows 20 MX-Sensors to be programmed simultaneously within 6 seconds.Newest Chip, 100% ID Copying: Same functionality with OE-level sensors, Autel tire pressure sensors can accurately monitor the tire pressure and return data to the vehicle computer for avoiding danger.Press-in Valve Design: Easy to install and dismantle sensor from the vehicle tires yourself. Saving more repair time and easing the repair steps.Interchangeable Valve: Interchangeable Autel TPMS sensor can easily be replaced into a (metal/rubber) valve.15-30°Adjustable Valve Stem: Flexible valve stem allows to be adjusted angle ranging from 15-30° to better fit the tire rim.5-Year Battery Life: Reliable sensor battery lasts 5-year power consumption to reduce extra money.Leading Post-sale Service: An 1-year quality undertaking, a 2-month return & replacement, 7*24 online response, and lifetime tech instruction for all users. Autel 2IN1 MX-Sensor Features:1. 315MHZ & 433MHZ 2in1This tire pressure monitoring sensor (for TPMS) has been manufactured to combine both 315 MHz and 433 MHz applications in one sensor to greatly simplify users’ inventory management and lower the investment as well as sales loss. And it is built to perform like OE sensors in terms of signal, durability and functionality.2.Maximum Signal Strength Wireless pro/grammingThe extraordinary sensor signal strength allows AUTEL 1-Sensor to be easily pro/grammed wirelessly even when the sensors have already been mounted to the wheel. And with strong signal strength, now up to 16 sensors can be pro/grammed in one session with Autel latest TPMS tools.3.Exclusive Press Release Interchangable Valve StemsThe patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy. 4.Superior Battery Reliability lower SensorWith the highest quality materials and advanced TPMS technology, AUTEL 1-Sensor provides superior battery life and reliability, to match OE sensor battery performance. The 1-Sensor body weighs only 13g, making it significantly lighter than most sensors in the market, which ensures better sensor stability and performance.5.98% Vehicle CoverageAn easy to use and cost effective necessity for any shop performing TPMS repairs, the Autel 1-SKU sensor has the long ability to cover over 98% of all OE sensors on the market, to support up 90% of North American, European and Asian brands. On the shop level, needing only 1-Sensor to service nearly every TPMS equipped vehicle means lower repair cost and higher install efficiency 6.Strict Quality ControlAutel guarantees MX-Sensor are free from manufacturing defects for a period of 24 months or 24,000 miles, whichever option comes first. Each Autel MX-Sensor has a series number for assuring quality control. The series number is imprinted on the sensor or can be read with Autel TPMS tools. With the series number, Autel can track the sensor quality from our factory manufacturing to ensure only the highest quality parts are installed. 99% of Vehicle Coverage + 1400 Vehicle Models Autel tire pressure sensors are engineered for virtually 99% of the make and model of passenger cars. Covering a wide range of American, Asian, and European vehicle models from 1996 to 2023. Working for worldwide 75+ makes and 1400+ vehicle models. Performing the same performance as the manufacturer TPMS sensor with less cost.America: Ford, Lincoln, Chrysler, Dodge, Jeep, GM, Cadillac, Chevrolet, Buick, GMC, etc,Asia: Acura, Lexus, Suzuki, Subaru, Mitsubishi, Mazda, Kia, Isuzu, Infiniti, Hyundai, Honda, Daihatsu, Daewoo, etc.Europe: VW, Seat, Skoda, Peugeot, Citroen, Renault, Volvo, Vauxhall, Smart, Saab, Rolls-Royce, Porsche, Mini, Maybach, Lancia, BMW, Jaguar, Fiat, Ferrari, Dacia, Citroen, Bugatti, Benz, Bentley, Audi, etc. Note: You can message our post-sale team for more compatibility details.Unlimited Programmable Autel MX-Sensor Autel MX-Sensor is a programmable sensor for fast installation with Autel affordable TPMS tools. Programmable sensors typically represent a smaller number of SKUs, but are capable of covering a larger range of vehicles. These blank sensors can be easily configured into different vehicle models once programmed.High Coverage: Programmable Autel MX-Sensor can be easily programmed and configured into different models. You no longer need to replace the old one with an expensive OEM sensor.Same Functionality: 100% ID copy feature achieves Autel TPMS sensor 100% cloning the original tire pressure data and operates same performance with OE level.Lower Inventory Pressure: Tire dealers/tire shops can reduce the stock of specialized OEM sensors and less the storage pressure.Profitable Income: Compared with the OEM sensors, Autel MX-Sensors are relatively cheaper. The technician can advise the owner to replace the cost-effective Autel TPMS cloneable sensor and increase profit. 315 & 433MHz Dual Frequency TPMS data is typically transmitted in one of two frequency ranges, which depends on the geographical location of the TPMS. (433MHz in Europe, and at 315MHz in other parts of the world). 2-in-1 (315MHz & 433MHz) dual frequency tire replacement sensor makes everything simple and no need to choose.Press-in Valve Design The press-in design ensures that the sensor body and valve stem are easy to install into the vehicle tire and dismantle from the vehicle wheel. Adjustable valve stem can be adjusted at any angle within the range of 15-30°to better fit different vehicle wheels and facilitate reading tire pressure， temperature, battery, etc.Interchangeable Valve Exclusive press-in release valve provides interchangeable rubber & metal valve stems that are easy to remove and replace by hand without a tool. 12g MX-Sensor weight is significantly lighter than other sensors on the market, which can keep greater security and stability for durable use.Same Quality as OEM Sensor Tested by SAE J1205/J1206/J2657 standard and strictly following the same quality with OEM sensor, this Autel MX-Sensor provides 6-year battery life and works in all types of weather conditions and operating temperatures ranging from -40℃ ~ 125℃. Autel 2IN1 MX-Sensor Specification:·Battery Life: ≥5 years·Operating Temperature: -40°C – 125°C·Storage Temperature: -40°C t – 125°C·Operating Humidity: ≤90%·Operating Frequency: 315 MHz~433MHz·Max. Pressure range: 800 kPa·Temperature Reading Range: -40°C – 125°C·Temperature Reading Accuracy: ±5°C·G Sensor Reading Accuracy: ±15%·Transmission Power: 5-8dBm·Battery: 3.0 V·Dimensions: Approx. 42.4*24.1*16.0 mm·Weight of Sensor without Valve: 13gPackage List:1x MX-Sensor1x User Manual QA:How To Install This Autel MX-Sensor 1 Sensor? 1.Loosening the tire: Remove the valve cap and core and deflate the tire. Use the bead loosener to unseat the tire bead.2.Dismounting the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to dismount the bead.3.Dismounting the sensor: Remove the screw nut from the valve stem, and then remove the sensor assembly from the rim.4.Mounting sensor and valve: Connect the sensor body and valve stem at a suitable angle (normally use the maximum angle of 30 degrees) and tighten the screw.5.Remove the screw nut from the valve stem.6.Slide the valve stem through the valve hole of the rim with the sensor on the inside of the rim.7.Tighten the screw-nut with 4.0 nm with the help of the positioning pin.8.Mounting the tire: Place the tire on the rim, make sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.Notice:·The TPMS sensor assemblies are replacement or maintenance parts for vehicles that have a factory installed TPMS.·Make sure to pro/gram the sensor by Autel sensor pro/gramming tools for your specific vehicle make, model and year before installation.·Do not install pro/grammed TPMS sensor in damaged wheels.·In order to guarantee optimal function, the sensor may only be installed with original valves and accessories provided by Autel.·Upon completion of installation, test the vehicle TPMS systems using procedures described in the original manufacturer’s user guide to confirm proper installation.·Each time a tire is serviced or dismounted, or if the sensor is removed or replaced, it is mandatory to replace the rubber grommet, washer, nut and valve core with our parts to ensure proper sealing. It is mandatory to replace the sensor if it is extremely damaged.·Autel MX-Sensor arrive blank and must be pro/grammed with an Autel TPMS service tool prior to installation or at 0 PSI/kPa·Do not race with the vehicle on which the Snap-in MX-Sensor is mounted, and always keep the drive speed under 180km/h for Metal Valve sensor, or 240km/h for Rubber Stem sensor.PaymentDelivery detailsTerms of salesAbout usContact usPayment1.We accept Credit cards、Debit card、Apple Pay、Google Pay etc.payment. 2.Please contact us if you need to use another method to pay. 3.Payment should be made within 4 days after bidding ends. 4.Otherwise an Unpaid Item case will be opened to you. 5.We are not responsible for buyers’ local taxes. 6.Please include your special requests in eBay note if there is any. 7.We reserve the final right of sellingDelivery details1. ShippingOrder will be shipped within 1 business day after payment confirmed.We have warehouse in USA，UK，HongKong，Australia，Russian，Germany，Ukraine and China warehouse.2. From our US/UK/RU/DE/AU warehouse via USPS UPS or DHL eCommerce shippingDelivery time varies from 2 to 6 business days.3. From our China warehouse via UPS DHL or FedexDelivery time varies from 5-12 business days.4. We will ship according to your payment address.Please make sure it is correct and include phone number for delivery.If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.5.Please include your special requests in eBay note if there is any.Terms of salesBuyer Guarantee We assure you that we are a honest and super reliable seller on ebay,top rate seller, any problems can be solved in a satisfing way for you and any loss will not be brought to you as long as you will kindly contact us via ebay message or your private email. Please kindly contact us firstly if your purchasing is in trouble before leaving any bad feedback including neutral and negative feedback and leaving 3 stars or less stars to me on 4 criteria.Return Policy Please return the item within 30 days after receiving if you are not happy with your purchasing. All returns are expected to be in original conditions, please email us first for return address and instructions.About us Autel Founded in 2004, Autel is an expert in car diagnostic for over 18 years and has become one of the most popular sellers of car diagnostic tools. We strive to be a global leading provider of automotive diagnostic tools. Autel provides a complete product portfolio for the automotive diagnostic industry including the world's famous MaxiSys series & MaxiDiag Elite series, TPMS universal solution, ADAS Calibration solution, CV solution, and so on. About our shop: We are major online distributors authorized by Autel Official. We are commited to provide our customers the best buying experiences on eBay and the best customer services with 24/7/365 fast reply and professional tech-support backup by Autel HQ tech supports.(each device is 100% original,otherwise we will provide a triple compensation)Contact usOur customer-oriented service strives for positive feedbacks with all 5 star selling ratings.Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case.We will reply in 24 business hours.Business time: GMT8 (9:00-18:00) from Monday to Friday.On Jun 18, 2024 at 03:14:00 PDT, seller added the following information:
Autel TS408 TPMS Programmer Tires Sensors Activate Programming Diagnostic ToolAutel TPMS Sensor MX-Sensor 315MHz+433MHz 2in1 TPS218 Tire Sensor Tire Pressure Monitoring System Sensor Program Universal Replace 98% of OE Sensor SAE Standard J1205/J120 (Rubber Valve Stem, 1pack)About this item[Tire Pressure Monitoring System Sensor combines 315MHz+433MHz Frequency]: Autel 2 in 1 MX-Sensor builds to match or exceed OEM sensors are 100% ID clone-able with no relearn required when it's cloned with original sensor ID and put in the same position, coverage the solution with 98% model vehicles from Autel wireless programming tool. Superior battery life and stability high performance for a period of 24 months or 24,000 miles. Guaranteed with SAE industry standard J1205/J1206 testing.[Upgraded Version Compared with Other General Tire Sensors]: The Autel new MX-Sensor with interchangeable rubber and metal valves to replace 98% of OE sensors with only 1-Sensor types. The exclusive 15°-30° Angle Adjustable design Screw-in rubber/matal valve to be interchangeable easily, which minimizes installation time and provides a quick and simple assembly. Only 11 gram weight light and superior battery power means it's more durable and longer than most sensors' life and replacement value.[Extensive Coverage of 98% US/Asian/European Vehicles]: An easy-to-use and cost-effective necessity for any shop performing TPMS repairs, MX-Sensor TPS218 eliminates the needs for distributors to equip with hundreds of sensors to fulfill shop orders. Provides ECU Information of MX-Sensor TPS218 ID,volt,tire pressure,temperature,battery,position,frequency,Hardware/Software Ver.[Autel Programmable Universal TPMS Sensor for OEM Replacement with Wireless programming Tool]: Autel is the only manufacturer to produce both TPMS sensors and easy-to-use tools to offer complete OEM TPMS solution. Maximum sensor signal strength to program up to 16 MX-Sensors wirelessly, replace the faulty or low battery life or invalid OE/MX/Other sensors.(Highly Recommend Auteltech MaxiTPMS TS508 to program MX-Sensor, search "..." to purchase)Product DescriptionAutel MX-Sensor TPS218 New Generation 2in1 315MHz+433MHz Tire Sensor for all 98% OE Tire ReplacementAutel Programmable Universal TPMS MX-Sensor TPS218 New Generation 100% ID Clone-able with No Relearn Required (Metal & Rubber Screw-in Valve) Autel MX-Sensor combines both 315MHz+433MHz frequencies into one TPMS sensor with the highest industry vehicle coverage. The exclusive MX-Sensor patented screw release valve stem design, allows rubber/metal valve stems to flex the angle(normally use the maximum angle of 30°), without requiring a tool for sensor head fitting. Built to match or exceed OEM sensors in frequency strength and durability, MX-Sensors are 100% ID clone-able with no relearn required and offer latest model vehicle coverage because they quickly update with an Autel wireless programming tool. Special Features: 2 IN 1 FEATURE: Only 1 Sensor to service nearly every TPMS equipped vehicle to lower repair cost and to have higher install efficiency with no relearn required. The MX-Sensor is 100% cloneable with the original sensor ID and put in the same position.98% COVERAGE: Featuring the latest and most comprehensive coverage of 98% OE sensors on the market, and up to 90% of North American, European and Asian vehicles, it nearly fits all types of wheels on the road.EASY TO USE: The maximum sensor signal strength allows sensors to be easily programmed wirelessly even when they have already been mounted to the wheel. Moreover, the unique PRESS release valve design makes the manual sensor replacement much easier.SOLID & DURABLE: Equipped with an automotive grade battery, a replaceable metal/rubber valve stem to withstand cold, hot and resistance corrosion, and a high-precision air valve to prevent air leakage, this sensor ensures superior stability and performance.Service: MX-Sensor is free from material and manufacturing defects for a period of 24months or for 24,000miles. Each sensor is marked with a series number to track the sensor quality from the factory to ensure that only the highest quality parts are installed.Technical Specifications of the Autel MX-Sensor TPS218 Tire Sensor (315MHz+433MHz)Complete Tire Pressure Monitoring System Solution Autel is the only manufacturer to produce both TPMS sensors and easy-to-use TPMS tools to offer a truly complete TPMS solution. Most Current Vehicle CoverageMore Compatible Tools & SensorsEasiest To Use Tool NavigationQuicker TPMS Repairs & Service Screw Release(flexible angle)98% Vehicles CoverageMax Signal StrengthSAE StrandardLow WeightBattery Reliability Autel MX-Sensor TPS218 Maximum Signal Strength Wireless Programming The extraordinary sensor signal strength allows AUTEL MX-Sensor to be easily programmed wirelessly even when the sensors have already been mounted to the wheel.With strong signal strength, now up to 16 Sensors can be programmed in one session with AUTEL latest TPMS tools. AUTEL MX-Sensor is 100% clone-able.No relearn is required when the MX-Sensor is cloned with the original sensor ID and put in the same position. Autel MX-Sensor TPS218 Superior Battery Reliability Lower Sensor Weight With the highest quality materials and advanced TPMS technology, AUTEL MX-Sensor provides superior battery life and reliability, to match OE-Sensor battery performance.The MX-Sensor body weights only 11g, making it significantly lighter than most sensors in the market, which ensures better sensor stability and performance. Autel MX-Sensor TPS218 with 98% Vehicles Coverage Limited 1-SKU Inventory An easy-to-use and cost-effective necessity for any shop performing TPMS repairs, the Autel MX-Sensor inventory solution with 98% vehicle coverage eliminates the need for distributors to carry the hundreds of sensors to fulfill shop orders.On the shop level, needing only MX-Sensor to service nearly every TPMS equipped vehicle means lower repair cost and higher install efficiency. Autel MX-Sensor TPS218 SAE-Tested & Strandard Strict Quality Control AUTEL high-quality MX-Sensor is tested and certified to meet SAE industry standard J1205/J1206 testing.The MX-Sensor are free from manufacturing defects for a period of 24months or 24,000miles, whichever option comes first.Each Autel MX-Sensor has a series number for assuring quality control. The series number is imprinted on the sensor or can be read with Autel TPMS tools.With the series number, Autel can track the sensor quality from our factory manufacturing to ensure only the highest quality parts are installed. Autel MX-Sensor TPS218 Specifications DetailsBattery Life:4-6 yearsOperating Temperature:-40°C to +125°CStorage Temperature:-40°C to +35°CTemperature Reading Range:-40°C to +125°CTemperature Reading Accuracy:±5°COperating Frequency:315 MHz / 433 MHzPressure Monitoring Range:0 to 800 kPaPressure Reading Accuracy:±10 kPaG Sensor Reading Accuracy:±15%Transmission Power:5-8 dBmBattery:3.0 VDimensions (W x H x D):42.4 mm x 24.1 mm x 16 mmWeight (Without Valve):11gPaymentDelivery detailsTerms of salesAbout usContact usPayment1.We accept Credit cards、Debit card、Apple Pay、Google Pay ect. payment. 2.Please contact us if you need to use another method to pay. 3.Payment should be made within 4 days after bidding ends. 4.Otherwise an Unpaid Item case will be opened to you. 5.We are not responsible for buyers’ local taxes. 6.Please include your special requests in eBay note if there is any. 7.We reserve the final right of selling. Delivery detailsShippingOrder will be shipped within 1 business day after payment confirmed.We have warehouse in USA，UK，HongKong，Australia，Russian，Germany and China warehouse.From our US/UK/RU/DE/AU warehouse via UPS or DHL eCommerce shippingDelivery time varies from 2 to 6 business days.From our Hong Kong warehouse via DHL or FedEx GroundDelivery time varies from 3 to 5 business days.From our China warehouseFor US buyers, we use e-Packet (Delivery time is 5-12 business days) or express delivery(Delivery time is 3-7 business days) .For other countries' buyers, we use China Post or Hong Kong Post(Delivery time varies from 10 to 25 business days)or Express delivery(Delivery time is 3-7 business days).We will ship according to your Ebay address.Please make sure it is correct and include phone number for delivery.If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.Please include your special requests in eBay note if there is any.Terms of salesBuyer GuaranteeWe assure you that we are a honest and super reliable seller on ebay, any problems can be solved in a satisfing way for you and any loss will not be brought to you as long as you will kindly contact us via ebay message or your private email. Please kindly contact us firstly if your purchasing is in trouble before leaving any bad feedback including neutral and negative feedback and leaving 3 stars or less stars to me on 4 criteria.Return PolicyPlease return the item within 30 days after receiving if you are not happy with your purchasing.All returns are expected to be in original conditions, please email us first for return address and instructions.About us Who We Are? We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years. What Do We Have? We have office and warehouse in Australia and US to ensure fast shipment and after-sale service. We have more than 100 employees devoting to customer satisfaction. Terms of tax: We are not responsible for buyer's local taxes, please consult your local Customs for tax details.Contact us Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings. Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case. We will reply in 24 business hours. Business time: GMT8 (9:00-18:00) from Monday to Friday.
2 In 1 (315MHz + 433MHz) FEATURE Only 1 Sensor to service nearly every TPMS equipped vehicle to lower repair cost and to have higher install efficiency with no relearn required. LAUNCH sensors Highlights.
The Autel TPMS MX-Sensor is a versatile 2-in-1 auto tire pressure sensor designed for passenger vehicles. With a pressure monitoring range of 100 to 900 kPa and ±10 kPa pressure reading accuracy, it ensures precise tire pressure monitoring. This sensor, weighing 11g without the valve, offers a ±15% G sensor reading accuracy and a maximum pressure range of 900 kPa. It is compatible with a range of AUTEL TPMS tools for programming, and its features include a programmable universal sensor, LCD color display, internet updateability, and a long battery life of over 5 years. Ideal for a wide range of vehicles, this Autel TPMS sensor provides reliable tire pressure monitoring capabilities.
Unique valve stem design allows the tire pressure sensor to be flexibly adjusted from 15-30 angle to better fit wheel rims of larger or usual sizes and monitor tire pressure changes. Adjustable TPMS Sensor.
AUTEL MaxiTPMS TS601 OBD2 TPMS Sensor Programming Reset Diagnostic Scanner Tool Essential TPMS Scan Tool For DIYers and TechniciansAutel TS601 Scanner: Upgraded version of TS508K/TS508/TS501/TS408/TS401 tire pressure tool and designed with OBD2 full functions.TPMS Programming Tool: Copy old sensor ID and write it into Autel MX-Sensors with 4 programming options: Copy By Activation; Copy By Manual Input; Auto Create; Copy By OBD.TPMS Relearn Tool: Match OE/Common sensors to TPMS module with 3 relearn modes: Automatic Relearn; Stationary Relearn; OBD Relearn.TPMS Diagnostic Tool: Scan the tire pressure system and read & erase TPMS DTCs to recover vehicle performance.TPMS Activation Tool: Trigger all kinds of OEM and universal 315/433MHz sensors on the market and obtain sensor information data.OBD2 Code Reader: Hold full OBD modes including: Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Sensor Test, On-Board Monitor Test, Vehicle Information, and EVAP System Test.Lifetime Free Updating: Cover recently newer car models and upgrade the software version.3 Modes To Relearn TPMS Sensors Same as Autel TS508 and TS508K, Autel TS601 diagnostic scanner also has complete TPMS sensor relearn functions which can work on all the 315/433MHz TPMS sensors on the market. To turn off the TPMS warning light after repair and replacement, The TS601 TPMS scanner possesses 3 modes of sensor relearn to suit various vehicle compatibility. TS601 OBD2 code reader gives detailed instructions for all the sensor relearn procedures. OBD2 Relearn: Directly write the TPMS sensor IDs to the TPMS module via the OBD connector to make the on-board TPMS modules recognize the new sensors. About 50% of the users’ choice.Stationary Relearn: Keep the car be in the “Learn Mode” and follow the guidance to operate “Relearn”.Automatic Relearn: For some vehicle models, the “Relearn” can be completed automatically by driving. And the Autel TS601 TPMS scan tool also performs TPMS diagnostics for reading/ clearing codes of TPMS system, reading TPMS live data, retrieving TPMS E/CU information, doing actuation tests and special functions, and saving data for later reviews and printing.4 Options For Sensor Programming The programming function allows users to program the sensor data to the Autel MX-Sensor and replace a faulty sensor with low battery life or one that is not functioning. The Autel TS601 scan tool is easy-to-use with proven efficiency and accurate results. The TPMS programming is only for Autel sensors. Copy By Activation Situation: The old TPMS sensor is not completely broken. Solution: You can use the TS601 sensor programming tool to trigger the old sensors and obtain the old IDs, and then write them into the new MX-Sensors. Manual Inputting Situation: The old sensor can’t be activated. Solution: You can find the old ID from the cover of the old sensors, and manually input them to new MX-Sensors. Auto Create Situation: The old sensor is completely broken or the original sensor ID can’t be obtained. Solution: You can use the TS601 TPMS scan tool Auto create new unique ID(s) to program to new sensors. Copy By OBD Situation: Compatible with vehicles compliant with OBD protocol. Solution: Connect the OBD cable to retrieve the sensor ID from the E/CU and program the ID to the Autel sensor. Sensor ActivationThe sensor check function helps to activate a TPMS sensor to view sensor data such as sensor ID, tire pressure, tire temperature, battery condition, sensor position, and OE part number. The Autel TS601 TPMS check tool can trigger all the 315/433MHz sensors and receive the basic sensor information like Sensor ID, Tire Pressure, Tire Temperature, Frequency, Sensor Battery, Sensor Position, etc.TPMS Active TestActive test plays an important role in quickly locating vehicle problems. In the tire pressure system, the Autel TS601 sensor relearn tool works as a commander to send an order to E/CUs and utilizes bi-directional control to catch the tiny problems. This function is often used to check flat tire warning, ID regist warning, flasher, horn, warning lamp, T warn buzzer, etc.Full OBD FunctionsThe Autel TS601scanner is also known as an OBD code reader fulfilling all the 10 test modes to carry out a quick test on the engine system of OBD II-compliant vehicles. Including Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Sensor Test, On-Board Monitor Test, Vehicle Information, and EVAP System Test.User-friendly TPMS Tool With More Highlights RKE & RF Monitoring: Also known as Key Fob Check, you have no need to take your car to a dealership or an automotive locksmith to get remote control/key fob tested. You can use the Autel scanner TS601 to check the frequency and battery electricity of the key fob (315/433MHz), saving your time and money. Data Reviewing & Printing: View and print out saved data of the latest TPMS diagnostic recordings and all diagnostic data retrieved from the E/CUs of the OBD II-compliant vehicles by the service tool. Connect the Autel TS601 activation tool to your PC or laptop to print detailed diagnostic & check reports for further analysis and future reference. System Settings: Following the TS601 sensor tool on-screen instruction and tapping the hot keyboards to complete system adjustment, you can fix some basic settings without much effort like Market, Language, Pressure Unit, Temperature Unit, ID Format, Beep Set, Wheels, Date, Distance Unit, Power-off, etc. Lifetime Software Updating: This Autel TS601 TPMS reset tool offers free updating in a lifetime to make sure the vehicle coverage and functions always get enhanced. On-screen Instruction: It is easy to perform basic sensor activation or complex diagnostic programming functions. Autel MaxiTPMS TS601 scanner provides on-screen instruction and code definition to simplify the diagnostic process and accelerate solving problems. At-A-Glance TPMS Status ScreenThe single-screen displays clearly data feedback from all 4 sensors and helps to understand the status of all TPMS features like sensors’ pressure (Kpa), temperature (°C), battery life, etc., which enables the technician to compare sensor/E/CU data to quickly identify the tire pressure system error and make sense of repair skills.Perfect DesignBuilt-in rechargeable battery offers a constant source to ensure the TPMS diagnostic, sensor programming, and sensor activation, and also contribute to convenience. The hard housing with rubber cover greatly protects the integrity of the Autel TS601 scanner to avoid crashes and conflicts.Carefree PurchaseTwo lucky things in one are that purchasing Autel TS601 works as a TPMS scan tool and an OBD2 code reader. Getting an Autel TS601 scanner is equal to holding a 24*7 post-sale team, professional technical instruction, and lifetime free updating. If any issues with this TPMS programming, feel free to message us.PaymentDelivery detailsTerms of salesAbout usContact usPayment1.We accept Credit cards、Debit card、Apple Pay、Google Pay etc.payment. 2.Please contact us if you need to use another method to pay. 3.Payment should be made within 4 days after bidding ends. 4.Otherwise an Unpaid Item case will be opened to you. 5.We are not responsible for buyers’ local taxes. 6.Please include your special requests in eBay note if there is any. 7.We reserve the final right of sellingDelivery details Shipping Order will be shipped within 1 business day after payment confirmed. We have warehouse in USA，UK，HongKong，Australia，Russian，Germany and China warehouse. From our US/UK/RU/DE/AU warehouse via USPS UPS or DHL eCommerce shipping Delivery time varies from 2 to 6 business days. From our China warehouse via UPS DHL or Fedex Delivery time varies from 5-12 business days. We will ship according to your payment address. Please make sure it is correct and include phone number for delivery. If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem. Please include your special requests in eBay note if there is any.Terms of salesWe are authorize distributor, our all items are 100% original and Our devices have warranty, 12 months free repair for the devices. 3 months for the accessories.Please contact us firstly when you need warranty service.In case an item arrives faulty, please contact us in 30 days and keep it unused.We will instruct you on how to return and get refund or replacement.If after 30 days, or the item has been used, we have the right to decline your claim.Items should be returned on buyers' cost for repair or replacement. About usWho We Are? We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years. We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands, and more brands will be show in our store in near future. What Do We Have? We have office and warehouse in Australia and US to ensure fast shipment and after-sale service. We have more than 50 employees devoting to customer satisfaction. Terms of tax: We are not responsible for buyer's local taxes, please consult your local Customs for tax details. Contact usOur customer-oriented service strives for positive feedbacks with all 5 star selling ratings. Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case. We will reply in 24 business hours. Business time: GMT8 (9:00-18:00) from Monday to Friday.
The common sensors on the market have only one frequency. Good news! (each device is 100% original,otherwise we will provide a triple compensation ). 2-in-1 frequency: 315MHZ+433MHz. TPMS stands for "Tire Pressure Monitoring System".